Termite Management • Reticulation Systems

Name Description Code Pack Size Files
ALTIS 150mm x 50m Roll

This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripperline fixed to the sheet. The run of dripper line is centred with this run 75mm in from the outer edges. This is in a roll 50m in length. Suitable for barriers at a depth 0 -100mm, using the 150mm perforated in the horizontal plane. Roller sold separately.

ALT-00004 EA
ALTIS 300mm Perforated x 50m Roll

Suitable to form the horizontal barrier of the internal perimeter of slab and cover service penetrations for slab on ground construction. This is a 300mm wide perforated plastic sheet, fitted with 1 (one) run of the dripperline fixed to the sheet. This run of dripper line is in centered with this run 150mm in from the outer edge. This is in a roll 50m in length. Roller sold separately.

ALT-00053 EA
ALTIS 600mm x 50m Roll

This is a 600mm wide perforated plastic sheet, fitted with 2 (two) runs of the dripperline fixed to the sheet. Each runs of dripper line is spaced at 300mm apart with each run 150mm in from the outer edge. This is in a roll 50m in length. Suitable to form the horizontal barrier of the internal perimeter of slab and cover service penetrations for slab on ground construction. Roller sold separately.

ALT-00003 EA
ALTIS 45°/135° Joint
Suitable fitting to put on the dripperline to go around bay windows. No clips required as the blue slip lock joints provide the necessary seal. Sold in bags of 25.


ALT-20035 Pk25
ALTIS 90º Joiner

Suitable fitting to put on the dripperline to go around 90° corners. No clips required as the blue slip lock joints provide the necessary seal. Sold in bags of 25.

ALT-20001 Pk25
ALTIS Inline Joint

Suitable fitting to join two pieces of dripperline together. No clips required as the blue slip lock joints provide the necessary seal. Sold in bags of 25.

ALT-00009 Pk25
ALTIS Stop End

Suitable fitting to put on the dripperline at the end of a run. No clips required as the blue slip lock joints provide the necessary seal. Sold in bags of 25.

ALT-00010 Pk25
ALTIS T Joint

Suitable fitting to link the dripperline into penetrations also can be used to go around external pipes and penetrations. No clips required as the blue slip lock joints provide the necessary seal. Sold in bags of 25.

ALT-20002 Pk25
ALTIS Black Link up Line

This line is used to connect between penetrations and the main line or other areas where there is no need for a dripperline. It is the same.

ALT-20026 EA
ALTIS Meter Box Sticker

To be completed by you and placed in the customers Electricity Meter Box after your installation has been carried out.

ALT-20034 EA
ALTIS Multi Manifold single/double

Suitable to link the system to a pump up point. For an external perimeter installation for up to 100Lm used for 150mm external perimeter and 300mm unperforated (dam wall) and also for 300mm economy under slab. Pre-assembled single/ double Manifold kit complete with 4 X 25mm herbie clips all in a bag. Sold individually.

ALT-20054 EA
ALTIS Purple Manifold complete double 600mm take off

Suitable to link the system to a pump up point. For an internal perimeter installation for up to 100Lm. Pre-assembled double Manifold kit complete with 4 X 25mm herbie clips all in a bag. Sold individually.

ALT-20053 EA
ALTIS Pump up tags

This tag can be attached to the manifold to indicate the length of dripper line runs that have been installed. It enables you to ensure that the system is not under or over services when charging with termiticide.

ALT-20023 EA
ALTIS Wall Plates

As part of the CSIRO opinion for systems installed in QLD where a concrete mowing strip is prescribed. Use of the wall plates allows the system to be installed without a mowing strip.These must be placed on each face of the perimeter of the building.

ALT-00038 EA
SX RETICUALTION KIT 10M
SX Reticulation is chemical resistant pressure pipe with emitter holes at regular spacings. The system is assembled usingpressure fittings generally clamps are not necessary as the system should be pumped at relatively low pressure.The pipe is flexible and strong and generally does not require “elbows” for bends, however “end stops”; “connector fittings”  PAT181 10m  
SX RETICUALTION KIT 80M
SX Reticulation is chemical resistant pressure pipe with emitter holes at regular spacings. The system is assembled using pressure fittings generally clamps are not necessary as the system should be pumped at relatively low pressure. The pipe is flexible and strong and generally does not require “elbows” for bends, however “end stops”; “connector fittings”  PAT180 80m