Bird Management • Bird Post and Wire Systems

Name Description Code Pack Size Files
BIRD POST STAINLESS STEEL 95mm x 4mm

Supplied in packs of 100.

Standard sized bird posts for Bird Wire systems to protect against pigeons.

Installed by knocking them into Abchor Rivets

Posts to be positioned at 1.5m intervals along the ledge.

These posts are used for the leading edge of a ledge.

The posts should be tilted forward slightly at angle, so that the wire directly overhangs the edge of the ledge.

If multiple rows are required, the distance between the rows should not exceed 75mm.

BIR024 Pk100  
BIRD POSTS STAINLESS STEEL 120mm x 4mm

Supplied in packs of 100.

Standard sized bird posts for Bird Wire systems to protect against pigeons.

Installed by knocking them into Abchor Rivets

Posts to be positioned at 1.5m intervals along the ledge.

These posts are used for the leading edge of a ledge.

The posts should be tilted forward slightly at angle, so that the wire directly overhangs the edge of the ledge.

If multiple rows are required, the distance between the rows should not exceed 75mm.

BIR004 Pk100  
BIRD POST STAINLESS STEEL 125mm x 4mm

Supplied in packs of 100.

Standard sized bird posts for Bird Wire systems to protect against pigeons.

Installed by knocking them into Abchor Rivets

Posts to be positioned at 1.5m intervals along the ledge.

These posts are used for the leading edge of a ledge.

The posts should be tilted forward slightly at angle, so that the wire directly overhangs the edge of the ledge.

If multiple rows are required, the distance between the rows should not exceed 75mm.

BIR033 Pk100  
BIRD POST STAINLESS STEEL 150mm x 4mm

Supplied in packs of 100.

Standard sized bird posts for Bird Wire systems to protect against pigeons.

Installed by knocking them into Abchor Rivets

Posts to be positioned at 1.5m intervals along the ledge.

These posts are used for the leading edge of a ledge.

The posts should be tilted forward slightly at angle, so that the wire directly overhangs the edge of the ledge.

If multiple rows are required, the distance between the rows should not exceed 75mm.

BIR005 Pk100  
DOUBLE-HEADED BIRD POST 130mm x 4mm

Designed for medium pressure infestations.

Installed by knocking them into Anchor Rivets

Posts to be positioned at 1.5m intervals along the ledge.

These posts are used for the leading edge of a ledge.

If multiple rows are required, the distance between the rows should not exceed 75mm.

These may also be installed horizontally above the ledge.

If installed horizontally ensure the posts are counter-tensioned.

Distance between holes - 43mm

BIR028 Pk100  
DOUBLE-HEADED BIRD POST 150mm x 4mm

Designed for medium pressure infestations.

Installed by knocking them into Anchor Rivets

Posts to be positioned at 1.5m intervals along the ledge.

These posts are used for the leading edge of a ledge.

If multiple rows are required, the distance between the rows should not exceed 75mm.

These may also be installed horizontally above the ledge.

If installed horizontally ensure the posts are counter-tensioned.

Distance between holes - 75mm

BIR031 Pk100  
STICK ON PLASTIC BASE - GREY

For use with 95mm and 125mm Bird Posts

In order for the bases to be glued, it is important that the ledge surface is sufficiently prepared.

Porous surfaces need to be sealed.

The oil that coats new lead must be removed.

Use a cleaner to remove grease and oil deposits from metal surfaces.

Apply the AVIFIX adhesive and press firmly on the base allowing the glue rivets to for through the holes.

Allow the AVIFIX to 'cure' for 24 hours before installing the springs and wire.

Standard Springs can be used with this item.

BIR007 Pk10  
BEAM CLAMP & POST 95mm x 4mm

Packed in bags of 10.

Designed for clamping Birdwire onto horizontal flanges ofgirders and beams.

The 21mm jaw fits over flange.

To secure the clamp in place, tighten the 25mm M6 bolt.

BIR026 Pk10  
PIGEON RAIL CLAMP POST

Supplied in packs of 10.

Designed to clip under Rail Clamps

Can be screwed into metal cladding usng a self drill screw.

5mm hole drilled in base.

95mm x 4mm Bird Post welded onto 1.5mm thick base.

BIR171 Pk10  
RAIL CLAMP 100mm x 1 POST

A way of supporting the Network Birdwire system on rails and pipes.

Clamps over the base of the Rail Clamp Post to hold in place.

Tighten the 7mm nut to hold the post firmly in place using a Nut Spinner.

Fits rails from 90mm-120mm diameter

BIR047  
SPLIT PINS STAINLESS STEEL 25mm

Supplied in packs of 100.

Discrete fixing.

To be inserted in a horizontally fitted anchor rivet.

Attach the Bird Wire spring to the split pin.

Can also be used as a Intermediate Net Fixing.

BIR013 Pk100  
ANCHOR RIVETS GREY 25mm

Supplied in packs of 100.

Designed to hold Bird Posts and Split Pins.

Anchor Rivets should be tapped into the drill holes.

The domed shape of the anchor rivet helps to reduce water penetration.

Split Pins are used where there is a vertical wall at the end of the Bird Wire.

Can also be used as a Intermediate Net Fixing

BIR010 Pk100  
BIRDWIRE MICRO SPRING

To be used for tensioning Wire

Guage = 0.91mm

Tensile Strength = 1580-1820 N/mm sq'd

Body Length = 12.2mm

Outside diameter = 5.97mm

Number of turns = 14

Weight = 128g/100

BIR040 Pk100  
BIRDWIRE STANDARD SPRING STAINLESS STEEL

To be used for tensioning Bird Wire

Guage = 0.91mm

Tensile Strength = 1580-1820 N/mm sq'd

Body Length = 22.2mm

Outside diameter = 7.92mm

Number of turns = 23

Weight = 291g/100

BIR009 Pk100  
BIRDWIRE CRIMPS NICKEL PLATED

100 Crimps per bag.

99.9% copper with 1/1000

Internal diameter = 1.80mm

External diameter = 2.40mm

Length = 8mm

Weight = 0,014 kg/100

The Bird Wire is threaded through the crimp and then through the hole in the bird post, and back through the crimp.

Fasten the crimp on the wire as close to the post as possible using the specially designed 'Crimp and Cutter Tool'

BIR012 Pk100  
BIRDWIRE NYLON COATED

100m reel

To protect against Pigeons.

Stainless steel, 1 x 7 wire construction.

0.45mm diameter.

Coated to 0.7mm with UV stabilised nylon.

Weight: 1.2 kg/km

Minimum breaking load 24.5 kg.

BIR001 100m  
BIRDWIRE NYLON COATED

300m reel.

To protect against Pigeons.

Stainless steel, 1 x 7 wire construction.

0.45mm diameter.

Coated to 0.7mm with UV stabilised nylon.

Weight: 1.2 kg/km

Minimum breaking load 24.5 kg.

BIR002 300m  
BIRDWIRE CRIMPER & CUTTER TOOL

A dual purpose easy to use tool.

For crimping the Crimps to the Bird Wire.

For Cutting the Bird Wire

BIR018