-
B&G Pressurising Tank TopBattery Powered - No more manual hand pumping!
B&G’s Pressurising Tank Top (PTT) replaces the traditional pump mechanism used in B&G Primeline stainless steel sprayers, eliminating the need to stop and pump during a service call.
-
Termidor High Pressure DeviceOnly for use with Termidor HE
Maximise your termite protection with the cutting-edge Termidor High Pressure Device (HPD). The Termidor High Pressure Device is specifically designed to be used for applications of Termidor HE by allowing for hole spacings of up to 600mm, ensuring the same unparalleled coverage with fewer drill points.
Developed in collaboration with BASF, the Termidor High Pressure Device operates at a minimum pressure of 800psi, harnessing the power of Termidor HE's patented Advanced Polymer Technology™. This synergy between Termidor HE and the high-pressure device offers pest control professionals a revolutionary way to apply termite treatments, reducing the number of holes needed and minimising disruption to structures.
-
Rega Adaptor for the B&G Pressurising Tank TopFor use with B&G PTT
The Rega Adaptor for the B&G Pressurised Tank Top is custom-designed to bridge the gap between your Rega Spray Unit and the new battery-powered B&G Pressurising Tank Top, allowing for a seamless and efficient upgrade. This precision-engineered adaptor makes it possible to install the B&G Pressurising Tank on your Rega Spray Unit, unlocking the full potential of your spraying equipment.
-
Power Planter 324HD Auger
7.5 x 60cm for Trelona ATBS
The Power Planter 324HD Auger is engineered for the demands of professional use, making it the ideal choice for pest controllers. Measuring 3 inches (7.5 cm) in width and 24 inches (60 cm) in length, the Power Planter 324HD auger is designed for technicians installing Trelona ATB Systems.
-
Power Planter 224HD Auger
5 x 60cm for Sentricon stations
The Power Planter 224HD Auger is the ideal auger size for installing Sentricon Termite Baiting Stations in soil, making it the ideal choice for pest professionals who demand efficiency and reliability.
Measuring 2 inches (5 cm) in width and 24 inches (60 cm) in length, this auger features a hardened steel tip with additional welding for enhanced durability. Its professional trade design is perfect for frequent use, ensuring consistent performance across a variety of tough conditions.
-
Tapered Cork 19 x 13/10mm (Pack of 1000)
A pack of 1000 tapered corks with each cork measuring 19 x 13/10mm. Each cork is made from a single piece of natural cork.
-
Go Plugs 8mm Diameter (Pack of 500)
Various colours available
Go-Plugs are small plastic plugs that offer a fast, efficient, and professional solution for sealing drill holes during termite treatment and other applications. Traditionally, plugging drill holes required wadding and concrete mortar, which can be time-consuming and difficult to match with existing surfaces.
-
Go Plugs 13mm Diameter (Pack of 500)
Various colours available
Go-Plugs in 13mm diameter are small plastic plugs that offer a fast, efficient, and professional solution for sealing drill holes during termite treatment and other applications. Traditionally, plugging drill holes required wadding and concrete mortar, which can be time-consuming and difficult to match with existing surfaces.
-
Go Plugs Pebble 8mm Diameter (Pack of 100)
Various colours available
Go-Plugs Pebbles in 8mm diameter are small plastic plugs that offer a fast, efficient, and professional solution for sealing drill holes during termite treatment and other applications. The Pebble Versions are specially designed for exposed aggregate slabs. Traditionally, plugging drill holes required wadding and concrete mortar, which can be time-consuming and difficult to match with existing surfaces.
-
FlowZone Vortex 40V/12Ah Lithium-Ion Battery Pack
For the FlowZone Vortex Mist Blower
The FlowZone Vortex 40V/12Ah Lithium-Ion Battery Pack is a high-performance, rechargeable power source designed for use with the FlowZone Vortex Mist Blower. With 40 volts of power and a 12 amp-hour capacity, this battery provides reliable and long-lasting energy for extended misting sessions.
-
Bainbridge Chemical Measuring Jug
Suitable for measuring fluid chemicals
Bainbridge Chemical Measuring Jugs are high quality measuring jugs designed with precision and durability in mind so you can take control of your chemical measurements. These jugs are ideal for safely handling a wide range of chemicals in various industries, including agriculture, pest control, and more.
-
Gel Bait Applicator Gun
For cockroach and ant gel baits
Gel Bait Applicator Guns are designed to help you apply cockroach baits and ant baits with precision, efficacy and ease. Built with a robust and ergonomic design, this gel bait applicator gun is the ideal tool for pest control professionals. Compatible with all syringe-style gel baits, it ensures accurate placement of gel baits, even in hard-to-reach areas, while minimising product waste.
Globe's insecticide foggers can be divided into two main groups - thermal foggers and ULV cold foggers. Thermal foggers produce an ultra fine mist by heating up the pesticide liquid with a heat coil powered by propane or electricity and vaporising it. These thermal fogging machines produce a large count of incredibly small particles, making for a dense cloud of visible fog. Because the fog droplets that thermal insect foggers create are so small, they stay in the air for longer meaning the pesticides have a better chance of coming into contact with any flying insects in the vicinity. ULV cold foggers or ultra-low volume foggers use air pressure to atomise the insecticides. As they do not use heat, and thus do not pose a fire risk, these pesticide foggers are more suited for indoor use. The particle size of the droplets produced is more uniform and can be controlled by the operator to suit their needs. Cold foggers are ideal for applying fungicides and controlling mould both indoors and outdoors, treating both surfaces and airspaces.