Glue Board Fly Traps & Electric Fly Zappers

Beam Clamp & Post is a tool designed for bird wire systems. Designed for clamping bird wire onto horizontal flanges of girders and beams. The Beam Clamp has a 21mm jaw which fits over flanges.

The Stick-on plastic bases support bird wire system and can be glued to any ledge surface. Posts that are 4mm are designed to be inserted into these Stick-on Bases.

Bird wire Standard Spring is to be used for tensioning bird wire on the post and bird wire system.  Standard Springs are installed at one end of each run of bird post and wire.

Bird wire Micro Spring is to be used for tensioning bird wire on the post and bird wire system.  Micro Springs are installed at one end of each run of bird post and wire.

Split pins are a discrete fixing that need to be inserted in a horizontally fitted anchor rivet. Once horizontally fitted attach the bird wire spring to the split pin. These Split Pins can also be used as an intermediate net fixing.

Bird wire crimps are used to secure the end of bird wire run. The bird wire is threaded through the crimp and then through the hole in the bird post, and back through the crimp.

A dual purpose easy to use tool designed for cutting bird wire and crimping the crimps. This multi-purpose tool is highly durable and high strength which is built to last.

The Altis 90-Degree Joiner is designed to suit Altis reticulation systems in termite management installations. This versatile 90-degree shaped provides a flexible trajectory for the dripper line to circulate around bay windows and other installation requirements. Its superior design includes sealing slip lock joints which offer a secure and easy-to-use fitting.

The Altis Square Pathway Trap is a pump-up fitting that allows the manifold pump to be concealed. This is a lockable trap and is the recommended pathway trap for use with Altis reticulation systems. It comes supplied with 2 screws and requires an Allen key to tighten.

The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.

The Altis 45 degree / 135 degree joint is a dripper line fitting suitable for routing the dripper line around bay windows. No clips are required as the slip lock joints provide the necessary seal required by the termite reticulation system.

The Altis Inline Joint is a dripper line fitting used to join two pieces of dripper line together in the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.