Rodent Traps & Bait Stations

TERM-seal Sealant Active is designed for use in joints and cracks of all types to protect buildings and other structures from entry by termites. Used by itself for construction joints & saw cuts, it also compliments other TERM-seal products as a bonding agent for concrete, timber, and masonry, sealing penetration collars to pipes, repairs, and joints.

The TERM-seal Termite-Pro Perimeter Retreatment System can be integrated with other TERM-seal systems to provide comprehensive termite protection to both new buildings and renovations or additions to existing buildings across Australia.

TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.

Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.

The Termstop Reticulation Kit features a chemical-resistant pressure pipe with emitter holes at regular spacings to help deliver pesticides around a treated zone or perimeter around buildings.

The Tramex Moisture Encounter 5 (ME5) is a dual-depth, non-destructive moisture meter for instant moisture measurement and evaluation.

The Altis 150mm x 50m Pre-Made External Perimeter Roll is for use with the Altis termite reticulation systems. This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet.

The Makita Dusting Gun attaches to the Makita UB1103 Blower or Makita DUB 185 Blower to apply insecticidal dust to enclosed voids such as roof spaces and sub-floors.

The Makita 18V Hammer Driver Drill Kit with 3.0Ah Battery and Charger is a brushless and cordless combo kit that includes 2x 3.0Ah Lithium ion batteries, optimum charger & carry case.

The Makita 18V Blower DUB185 is a lightweight and powerful blower perfect for cleaning up after any job or for dusting applications. The improved 3-stage air volume settings and variable speed trigger provide the user with maximum control.

The Makita 24V Blower UB1103 is a lightweight and powerful blower for a wide range of cleaning and dusting applications. It features a 600W* motor for 4.1m³/min of air volume.

GFS Nail Kit 100 Pin + 1 Fuel Cell is a professionally designed spare accessory, ideal for a wide range of actuated nail guns.