Termite Detection & Application Equipment

Scatterbid is a bird bait used for the controbirdl of pigeons, sparrows, starlings and myna birds as specified in the directions of use. Scatterbird can only be supplied to and used by an Authorised Person. 

Fipforce Dust Termiticide and Insecticide contains 5g/kg of Fipronil which is toxic to insects by contact or ingestion. FipForce Dust is applied through a hand duster to help in the control of Termites, Nuisance ants and Cockroaches. It has a mineral based carrier which flows extremely well and is less susceptible to moisture than cellulose based dusts. Less moisture build-up means less clogging of the application procedure.

TERM-seal Ura-Fen Termite Resistant Adhesive is a high-quality, solvent-based polymer adhesive, specifically formulated for bonding TERM-seal Ura-Fen Shield TWB to concrete, masonry and sealing joins and corners of the termite barrier.

The Altis 90-Degree Joiner is designed to suit Altis reticulation systems in termite management installations. This versatile 90-degree shaped provides a flexible trajectory for the dripper line to circulate around bay windows and other installation requirements. Its superior design includes sealing slip lock joints which offer a secure and easy-to-use fitting.

The Altis Square Pathway Trap is a pump-up fitting that allows the manifold pump to be concealed. This is a lockable trap and is the recommended pathway trap for use with Altis reticulation systems. It comes supplied with 2 screws and requires an Allen key to tighten.

The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.

The Altis 45 degree / 135 degree joint is a dripper line fitting suitable for routing the dripper line around bay windows. No clips are required as the slip lock joints provide the necessary seal required by the termite reticulation system.

The Altis Inline Joint is a dripper line fitting used to join two pieces of dripper line together in the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

The Altis Stop-End is a dripper line fitting used to on the dripper line at the end of a run of the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

Vexo K6XL Extra Large Ultra Dense Bird Spikes feature extra-long spikes providing 25% greater height and width coverage than the standard K6 model. This gives you the best of both worlds by maintaining the higher spike density required to exclude smaller pest birds while adding the extra height required to tackle taller pest species.

VEXO ZP-50 solar mesh fasteners are patented designed and manufactured to provide the highest quality and reliability on the market. Made from UV-protected nylon, these fasteners can be secured with one hand to allow a safe and fast installation.