3M Scott Safety Promask Full Race Respirator PP LQF (Medium-Large)

The 3M Scott Safety Promask PP (Positive Pressure) face mask for self contained breathing apparatus (SCBA) will accommodate a wide range of facial shapes and sizes. The masks are positive pressure and feature a Butyl Rubber (Procomp™) outer mask with reflex seal and TPE (Thermo plastic elastomer) ori-nasal inner mask.

Key features and benefits of The 3M Scott Fire & Safety Promask Full Race Respirator PP LQF

• The face-piece visor is single curvature and made of a scratch and impact resistant polycarbonate material with a flame-retardant coating and provides excellent panoramic vision.
• The visor is held in place by two U shaped clamps.
• The mask will allow the wearer to wear integrated spectacle frames, without compromising the face mask seal.
• The mask is available with either a five-point fully adjustable neoprene strap style harness or a two-point adjustable Polyester or Kevlar™ net style harness.
• The face mask features a left hand side bayonet connection for the demand valve.
• An option of an additional right quick-fit port to take a communications interface or a drinking adaptor is also available.
• A speech diaphragm is mounted at the front of the mask to offer unimpeded speech transmission
• A low resistance positive pressure exhalation valve that allows for normal breathing with no extra effort.
• The mask is designed with separate inspiratory and expiratory paths to minimise the risk of cross contamination of second stage regulators.

Application

The Promask PP is specifically designed for use with the Scott Safety range of breathing apparatus from the professional firefighting SCBA through to the Airline breathing apparatus range.

Storage

• The Promask PP Full Face Mask should be protected from direct sunlight, grease and oil.
• The store should be dry and cool.
• The components should not be more than 5 years old.
• Storage of respirator: -10°C...+50°C, and relative humidity (RH) under 75%.