- Term-seal Termite-Pro Perimeter Retreatment System Kit
The TERM-seal Termite-Pro Perimeter Retreatment System can be integrated with other TERM-seal systems to provide comprehensive termite protection to both new buildings and renovations or additions to existing buildings across Australia.
- TERM-seal Ura-Fen Shield TWB (Tri-Layer Sheet Barrier)
Bifenthrin
TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.
- Tensorgrip C40 Hi-Tack Spray Adhesive
Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.
- TermStop Reticulation Kit
The Termstop Reticulation Kit features a chemical-resistant pressure pipe with emitter holes at regular spacings to help deliver pesticides around a treated zone or perimeter around buildings.
- Tramex Moisture Encounter 5 (ME5) Meter
The Tramex Moisture Encounter 5 (ME5) is a dual-depth, non-destructive moisture meter for instant moisture measurement and evaluation.
- Altis 150mm x 50m Pre-Made External Perimeter Roll
Altis Reticulation Perimeter
The Altis 150mm x 50m Pre-Made External Perimeter Roll is for use with the Altis termite reticulation systems. This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet.
- Makita 18V Brushless Hammer Driver Drill Kit with 3.0Ah Battery and Charger
The Makita 18V Hammer Driver Drill Kit with 3.0Ah Battery and Charger is a brushless and cordless combo kit that includes 2x 3.0Ah Lithium ion batteries, optimum charger & carry case.
- GFS Nail Kit 100 Pin + 1 Fuel Cell
GFS Nail Kit 100 Pin + 1 Fuel Cell is a professionally designed spare accessory, ideal for a wide range of actuated nail guns.
- Greenzone Termite Perimeter Barrier System
Greenzone Termite Perimeter Barrier System is a physical termite risk management measure that is flexible in nature and is classed as a chemical barrier in a non-soil matrix. It is a once only treatment that is designed to last the economical life of the building.
- Concrete Seals / Plugs 6-11mm (Pack of 500)
Concrete seals will plug drill holes in concrete and are made from plastic soft enough to conform to irregular surfaces, but hard enough to hold firmly. Available in a range of colors and sizes to suit your application.
- Concrete Seals / Plugs 12-14mm (Pack of 500)
Concrete seals will plug drill holes in concrete and are made from plastic soft enough to conform to irregular surfaces, but hard enough to hold firmly. Available in a range of colors and sizes to suit your application.
- Masonry Drill Bit SDS
High quality masonry drill bits of various diameter and length to suit your application.
Insecticide dust applicators are ideal for applying insecticidal dust and powders in non-exposed surfaces like cracks and crevices where cockroaches, silverfish, ants and termites are likely to hide. Pest control powder dusters are well suited for dry and undisturbed spaces that are difficult to access by humans as the dust lasts longer, allowing insects to pick it up as they travel across. Explore our range of insecticide dusters such as bulb dusters, which are small hand dusters that allow for the precise and controlled application of insecticide dust to inaccessible areas like around electrical outlets, underneath appliances, or in carpet edges. We also have electric dusters for applying insecticide dust to larger areas not often frequented by humans such as crawl spaces and attics.