My Cart
Your shopping cart is empty.
-
GFS Magnetic Adaptor for Nail GunMagnetic adaptor designed for use with the GFS Gas Actuated Concrete or Steel Nail Gun
-
GFS Magnetic Steel Washers for Nail GunA pack of 500 Magnetic Washes designed for use with the GFS 1000 Concrete & Steel Trak Nail Gun
-
Makita Nemesis 2 Masonry Drill Bit (SDS 4-Cutter)The Makita Nemesis 2 Masonry Drill bit with 4-cutter geometry is a premium drill bit with a full carbide head for improved durability and dust removal. Available in a range of lengths and diameters.
-
Notice for 'New Construction - Termite Management System' (Pack of 10)
Pack of 10 Notices
A templated sign and notice record for the installation of a Termite Management System during for new construction.
-
Notice for 'Existing Construction - Termite Management System' (Pack of 10)
Pack of 10 Notices
A templated sign and notice record for the installation of a Termite Management System in an existing structure (post-construction).
-
Notice for Termite Treatment (WA Only) - Pack of 10
Only Available in WA. Pack of 10 Notices.
A pack of 10 'Notice of Termite Treatment' templates in accordance with Health (Pesticides) Regulations of 1956.
-
Altis 90 Degree Joiner
Altis Reticulation Fitting
The Altis 90-Degree Joiner is designed to suit Altis reticulation systems in termite management installations. This versatile 90-degree shaped provides a flexible trajectory for the dripper line to circulate around bay windows and other installation requirements. Its superior design includes sealing slip lock joints which offer a secure and easy-to-use fitting.
-
Altis Square Lockable Pathway Traps
Altis Reticulation Fitting
The Altis Square Pathway Trap is a pump-up fitting that allows the manifold pump to be concealed. This is a lockable trap and is the recommended pathway trap for use with Altis reticulation systems. It comes supplied with 2 screws and requires an Allen key to tighten.
-
Altis T-Joint
Altis Reticulation Fitting
The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.
-
Altis 45 Degree / 135 Degree Joint
Altis Reticulation Fitting
The Altis 45 degree / 135 degree joint is a dripper line fitting suitable for routing the dripper line around bay windows. No clips are required as the slip lock joints provide the necessary seal required by the termite reticulation system.
-
Altis Inline Joint with Locking Rings
Altis Reticulation Fitting
The Altis Inline Joint is a dripper line fitting used to join two pieces of dripper line together in the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.
-
Altis Stop End with Locking Rings
Altis Reticulation Fitting
The Altis Stop-End is a dripper line fitting used to on the dripper line at the end of a run of the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.
Foaming machines for pest control are best suited for small, enclosed spaces where the insecticide foam will create a physical barrier, like down sinks and drains, in hollow tubes and wall voids. The ability of the foam to expand and fill the area means no key surfaces will be missed and any pests nesting within the space will be eliminated by using an insecticidal foam. To produce foam, you can create the necessary pressure within the foaming machine by using the handpump, or in electric foamer systems you can simply activate the compressor by following the unit's instructions. You can also use foaming agents that can be mixed with your liquid pesticide to create a shaving cream-like texture. Our insecticide foaming units are portable making them ideal for spot treatment of pesticide foam in residential and commercial areas.