- B&G 2600-5 Flex-A-Lite ULV Fogger
Produces a range of spray droplets, from ULV (20 microns or less) to a mist (50 microns or larger), making it highly effective for pest management and most industrial, sanitisation and janitorial applications.
Out of stock - Dyna-Fog Superhawk Thermal Fogger
Its ultra-lightweight design and ability to produce large volumes of dense fog make the Dyna-Fog Superhawk Thermal Fogger ideal for use in both local and remote areas.
- Dyna-Fog Golden Eagle Portable Thermal Fogger
The Dyna-Fog Golden Eagle portable thermal fogger is acclaimed in the industry for its effective and economical dispensing of oil-based chemical products.
- B&G Flex-A-Lite 2600 ULV Fogger
Hand-held fogger designed to produce a range of spray droplets, from ULV (20 microns or less) to a power-mist (50 microns and larger) for indoor and outdoor applications.
- B&G PF-762 Pump Cylinder 5L - Stainless Steel
Stainless steel replacement pump cylinder to replace a damaged cylinder and restore sprayer pressure.
- B&G PF-273 Plunger Rod 10 1/4
B&G PF-273 Plunger Rod 10 1/4 inch is the plunger rod for the 2-gallon stainless steel B&G Prime Line sprayers.
- B&G PF-267 Pump Cylinder 5L - Brass
Brass replacement pump cylinder to replace a damaged cylinder and restore sprayer pressure.
- B&G FS-297 Siphon Tube 5L (253mm)
B&G FS-297 Siphon Tube 5L is a 253mm replacement siphon tube for B&G sprayers.
- B&G TS-792 Siphon Tube 2 Gallon (304mm) – Stainless Steel
B&G TS-792 is a stainless steel siphon tube for 2 gallon B&G sprayers that is 304mm long.
- B&G TS-297 Siphon Tube 2 Gallon (304mm) – Brass
B&G TS-297 is a brass siphon tube for 2 gallon B&G sprayers that is 304mm long.
- B&G D-50 Hose Unit 48"
D-50 Hose Unit 48" is a replacement hose unit for B&G Sprayers. It is 48 inches long and is made from strong, durable rubber.
- B&G XR Valve Repair Kit
The B&G XR Valve Repair Kit or B&G XR-100 XR-Gun Parts Kit contains the commonly needed parts for rebuilding the B&G XR Valve.
Globe's insecticide foggers can be divided into two main groups - thermal foggers and ULV cold foggers. Thermal foggers produce an ultra fine mist by heating up the pesticide liquid with a heat coil powered by propane or electricity and vaporising it. These thermal fogging machines produce a large count of incredibly small particles, making for a dense cloud of visible fog. Because the fog droplets that thermal insect foggers create are so small, they stay in the air for longer meaning the pesticides have a better chance of coming into contact with any flying insects in the vicinity. ULV cold foggers or ultra-low volume foggers use air pressure to atomise the insecticides. As they do not use heat, and thus do not pose a fire risk, these pesticide foggers are more suited for indoor use. The particle size of the droplets produced is more uniform and can be controlled by the operator to suit their needs. Cold foggers are ideal for applying fungicides and controlling mould both indoors and outdoors, treating both surfaces and airspaces.