- TERM-seal Ura-Fen Shield TWB (Tri-Layer Sheet Barrier)
Bifenthrin
TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.
- Tensorgrip C40 Hi-Tack Spray Adhesive
Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.
- Bird Wire Rope 2mm - Stainless Steel 200m
The stainless steel wire rope is 2mm diameter is appropriate for use in installing and erecting bird netting.
- Hog Ring Staples - Stainless Steel (PK2500)
Hog rings are used to attach bird netting to the net cable. Hog rings can also used to join net seams and secure zips into the net.
- GFS Nail Kit 100 Pin + 1 Fuel Cell
GFS Nail Kit 100 Pin + 1 Fuel Cell is a professionally designed spare accessory, ideal for a wide range of actuated nail guns.
- Greenzone Termite Perimeter Barrier System
Greenzone Termite Perimeter Barrier System is a physical termite risk management measure that is flexible in nature and is classed as a chemical barrier in a non-soil matrix. It is a once only treatment that is designed to last the economical life of the building.
- Weepa Termite Protector Weep Hole Screen (PK20)
Bifenthrin infused flexible LDPE
Patented termite-resistant weep hole guard manufactured from bifenthrin infused plastic. Proven to deter termite entry through existing weep holes for up to 2 years as part of a termite management plan.
- Bird Wire Rope 2mm - Galvanised 200m
The galvanised wire rope is 2mm diameter is appropriate for use in installing and erecting bird netting.
- Aluminium Ferrule 2.5mm (PK100)
Aluminium Ferrule 2.5mm is the perfect way to secure a 2mm Galvanised wire rope.
- Copper Ferrule 2.5mm (PK100)
Copper Ferrule 2.5mm is the perfect way to secure a 2mm Stainless Steel wire rope.
- Ratchet Crimper Tool
The Ratchet Crimper tool is a heavy-duty tool designed for combining and sealing two elements together. The Ratchet Crimper tool is ideal for use with bird wire ferrules in bird netting installations.
- N7 Wire Cutter Tool
These N7 Wire Cutters are ideal for cutting Galvanised or stainless steel wires when installing or erecting bird netting.
Globe's insecticide foggers can be divided into two main groups - thermal foggers and ULV cold foggers. Thermal foggers produce an ultra fine mist by heating up the pesticide liquid with a heat coil powered by propane or electricity and vaporising it. These thermal fogging machines produce a large count of incredibly small particles, making for a dense cloud of visible fog. Because the fog droplets that thermal insect foggers create are so small, they stay in the air for longer meaning the pesticides have a better chance of coming into contact with any flying insects in the vicinity. ULV cold foggers or ultra-low volume foggers use air pressure to atomise the insecticides. As they do not use heat, and thus do not pose a fire risk, these pesticide foggers are more suited for indoor use. The particle size of the droplets produced is more uniform and can be controlled by the operator to suit their needs. Cold foggers are ideal for applying fungicides and controlling mould both indoors and outdoors, treating both surfaces and airspaces.