-
Altis Square Lockable Pathway TrapsAltis Reticulation Fitting
The Altis Square Pathway Trap is a pump-up fitting that allows the manifold pump to be concealed. This is a lockable trap and is the recommended pathway trap for use with Altis reticulation systems. It comes supplied with 2 screws and requires an Allen key to tighten.
-
Altis T-JointAltis Reticulation Fitting
The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.
-
Altis 45 Degree / 135 Degree JointAltis Reticulation Fitting
The Altis 45 degree / 135 degree joint is a dripper line fitting suitable for routing the dripper line around bay windows. No clips are required as the slip lock joints provide the necessary seal required by the termite reticulation system.
-
Altis Inline Joint
Altis Reticulation Fitting
The Altis Inline Joint is a dripper line fitting used to join two pieces of dripper line together in the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.
-
Altis Stop End with Locking Rings
Altis Reticulation Fitting
The Altis Stop-End is a dripper line fitting used to on the dripper line at the end of a run of the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.
Globe's insecticide foggers can be divided into two main groups - thermal foggers and ULV cold foggers. Thermal foggers produce an ultra fine mist by heating up the pesticide liquid with a heat coil powered by propane or electricity and vaporising it. These thermal fogging machines produce a large count of incredibly small particles, making for a dense cloud of visible fog. Because the fog droplets that thermal insect foggers create are so small, they stay in the air for longer meaning the pesticides have a better chance of coming into contact with any flying insects in the vicinity. ULV cold foggers or ultra-low volume foggers use air pressure to atomise the insecticides. As they do not use heat, and thus do not pose a fire risk, these pesticide foggers are more suited for indoor use. The particle size of the droplets produced is more uniform and can be controlled by the operator to suit their needs. Cold foggers are ideal for applying fungicides and controlling mould both indoors and outdoors, treating both surfaces and airspaces.