- Avishock Straight Connector (Pk20)
Avishock Straight Connectors are used to join straight runs of Avishock track. Each pack contains 20 connectors.
- Avishock Corner Connector (Pk20)
Used at corners to join Avishock tracks. Each pack contains 20 connectors.
- B&G 5850 4-way Tip Assembly
The B&G 5850 4-Way Tip Assembly is a complete superior assembly used for spraying equipment. The four-way tip provides a wide range of action, ideal in equipment for both broadcast applications and crack and crevice treatment.
- Avishock Jumper (Pk20)
Avishock Jumpers are used to connect the Lead Wire to the track via a Female Spade Connector. Each pack comes with 20 jumpers.
- Avishock Screw-In Wire Guides – Black (Pk100)
Avishock Screw-In Wire Guides are used for securing lead wire. Easily installed using a self-tap screw, these guides are ideal for installations on stone.
- Avishock Warning Plate (Pk25)
Made from hard-wearing plastic these notices need to be fitted near Avishock installations to help prevent unintentional shocks. Text: "WARNING – Electrified Flex-Track – Isolate before access."
- B&G 5850 4-way Tip Only
The B&G 5850 4-way Tip Only provides a wide range of action for broadcast applications. Providing a highly flexible product, the tip is compatible with B&G Sprayer Wands with multiple settings available, as well as with B&G sprayers.
- B&G 4 Way C&C (Crack & Crevice) Tip Assembly
The B&G 4 Way C&C (Crack & Crevice) Tip Assembly includes the holder for the B&G 4-way C&C Tip, a Viton Gasket, the B&G 4-way C&C Tip and the tip retainer
- Bent Wand for Spraying Systems Gun
Replacement Bent Wands to suit Spraying Systems Guns are available in 0.2m, 0.45m, 0.6m and 0.9m.
- Bent Wand for Rega Gun
Replacement bent wands to suit the Rega Gun are available in 0.3m, 0.45m, 0.6m and 0.9m.
- Straight Wand for Spraying Systems Gun
Replacement straight wands to suit Spraying Systems Guns are available in 0.2m, 0.3m, 0.45m, 0.6m, 0.9m and 1.2m.
- Straight Wand for Rega Gun
Replacement straight wands to suit the Rega Gun are available in 0.3m, 0.45m, 0.6m, 0.9m and 1.2m
Globe's insecticide foggers can be divided into two main groups - thermal foggers and ULV cold foggers. Thermal foggers produce an ultra fine mist by heating up the pesticide liquid with a heat coil powered by propane or electricity and vaporising it. These thermal fogging machines produce a large count of incredibly small particles, making for a dense cloud of visible fog. Because the fog droplets that thermal insect foggers create are so small, they stay in the air for longer meaning the pesticides have a better chance of coming into contact with any flying insects in the vicinity. ULV cold foggers or ultra-low volume foggers use air pressure to atomise the insecticides. As they do not use heat, and thus do not pose a fire risk, these pesticide foggers are more suited for indoor use. The particle size of the droplets produced is more uniform and can be controlled by the operator to suit their needs. Cold foggers are ideal for applying fungicides and controlling mould both indoors and outdoors, treating both surfaces and airspaces.