Sprayer Spare Parts & Maintenance - Ready to Use

HomeGuard Protectacote Primer is designed to be applied before HomeGuard Protectacote. Apply a single coat of the primer to run of masonry, concrete or fibre board prior to applying HomeGuard Protectacote Termite and Waterproof Barrier. All surfaces must be clean and free of grease and dirt before application.

HomeGuard Protectacote, in conjunction with the HomeGuard Precision Termite Management System (the HomeGuard System), forms a continuous waterproof and termite resistant barrier around the perimeter of new slab-on-ground structures and extensions to existing structures.

HomeGuard DPC provides total termite protection for the building perimeters. HomeGuard DPC (Damp Proof Course) is a tough, 500 micron, embossed polymer sheeting impregnated with Bifenthrin and when used as a component of a termite management system, meet the requirements of AS 3660.1 approved in accordance with and AS 3660.3 – Termite Management.

HomeGuard PB provides total protection for all building perimeters from subterranean termites. HomeGuard PB is a high impact, 300 micron, embossed polymer sheeting product that is impregnated with Bifenthrin and when used as a component of a termite management system, meet the requirements of AS 3660.1 approved in accordance with and AS 3660.3 – Termite Management.

HomeGuard® GT is a plastic granular material termite protection product, impregnated with Bifenthrin. HomeGuard® GT is designed to prevent concealed entry of subterranean termites through perimeter cavities and construction voids.

Homeguard's unique flexible collars are impregnated with bifenthrin. They physically stop attacking termites entering a structure via penetration pipes; they will also kill termites that contact the collar and repel them away from the penetration. Available in 100mm, 80mm, 50mm, 40mm, 25mm

Homeguard Collars are impregnated with bifenthrin. The collars physically stop attacking termites entering a structure via penetration pipes and will also kill termites that contact the collar and repel them away from the penetration. Available in 40, 50, 80 and 100 mm diameters.

Greenzone Sock Barriers are pipe collars specifically designed to be used on pipe penetrations to protect termite entry due to concrete expansion. Available in 40mm, 50mm, 80mm and 100mm to suit different pipe sizes.

GREENZONE® Termite and Insect Barrier is an innovative technology which integrates a compressible foam substrate with bifenthrin creating significant savings in labour and materials to install a combined termite repellent and compressible foam layer.

Sentricon Always Active IG (In-Ground) Termiticide Rods have the benefits of both chemical barriers and bait stations, without any of their drawbacks. No mixing, no trenches, no poison. And colony elimination may be achieved before termites are even detected!

Sentricon AG Termite Bait contains an insect growth regulator in an above ground station for the control of subterranean termites. Sentricon provides a scientifically tried and proven approach to termite control. The above ground termite baiting station used to eliminate termite colonies by encouraging termites to establish the station as a preferred feeding site.

A carton of Sentricon Always Active Ready-To-Install (RTI) Stations contains 28 units of Sentricon In-Ground Stations pre-assembled with Sentricon Always Active IG Termiticide Rods.