Sprayer Spare Parts & Maintenance

Shop By
Filters
Set Descending Direction

There are 37-48 of 50 products

  1. Beam Clamp and Post 95mm x 4mm (Pack of 10)
    Beam Clamp and Post 95mm x 4mm (Pack of 10)

    Beam Clamp & Post is a tool designed for bird wire systems. Designed for clamping bird wire onto horizontal flanges of girders and beams. The Beam Clamp has a 21mm jaw which fits over flanges.

  2. Stick on Plastic Base - Grey (PK10)
    Stick on Plastic Base - Grey (PK10)

    The Stick-on plastic bases support bird wire system and can be glued to any ledge surface. Posts that are 4mm are designed to be inserted into these Stick-on Bases.

  3. BirdWire Standard Spring Stainless Steel (PK100)
    BirdWire Standard Spring Stainless Steel (PK100)

    Bird wire Standard Spring is to be used for tensioning bird wire on the post and bird wire system.  Standard Springs are installed at one end of each run of bird post and wire.

  4. BirdWire Micro Spring (PK100)
    BirdWire Micro Spring (PK100)

    Bird wire Micro Spring is to be used for tensioning bird wire on the post and bird wire system.  Micro Springs are installed at one end of each run of bird post and wire.

  5. Split Pins Stainless Steel 25mm (PK100)
    Split Pins Stainless Steel 25mm (PK100)

    Split pins are a discrete fixing that need to be inserted in a horizontally fitted anchor rivet. Once horizontally fitted attach the bird wire spring to the split pin. These Split Pins can also be used as an intermediate net fixing.

  6. Bird Wire Crimps Nickel Plated (Pack of 100)
    Bird Wire Crimps Nickel Plated (Pack of 100)

    Bird wire crimps are used to secure the end of bird wire run. The bird wire is threaded through the crimp and then through the hole in the bird post, and back through the crimp.

  7. Bird wire Crimper and Cutter Tool
    Bird wire Crimper and Cutter Tool

    A dual purpose easy to use tool designed for cutting bird wire and crimping the crimps. This multi-purpose tool is highly durable and high strength which is built to last.

  8. Greenzone Backer Rod 50m
    Greenzone Backer Rod 50m

    Greenzone Backer Rods are an integral component of sealant joints and provide three main functions that allow the sealant joint to perform and stop the ingress of pests – in particular ants cockroaches and termites.

  9. Greenzone Termite Paint
    Greenzone Termite Paint

    2g/L bifenthrin

    Greenzone Termite Paint is a unique and innovative solution that provides a long-lasting protective barrier against termites and other pests. The paint is easy to apply, making it an ideal solution for both residential and commercial properties.
  10. TERM-seal Ura-Fen Termite Resistant Adhesive 260g
    TERM-seal Ura-Fen Termite Resistant Adhesive 260g

    TERM-seal Ura-Fen Termite Resistant Adhesive is a high-quality, solvent-based polymer adhesive, specifically formulated for bonding TERM-seal Ura-Fen Shield TWB to concrete, masonry and sealing joins and corners of the termite barrier.

Set Descending Direction

There are 37-48 of 50 products

Ensure your spray equipment remains fully effective and functional with our range of sprayer replacement parts and sprayer maintenance equipment. Our replacement parts for pump sprayers include gasket repair kits, hose units, plunger rods and more to keep your sprayer working efficiently. In addition our spray tank cleaner is an essential solution for removing chemical deposits and debris from all your pesticide spray equipment.

© Globe Pest Solutions 2024, a division of Australian Agribusiness