Sprayer Spare Parts & Maintenance

Beam Clamp & Post is a tool designed for bird wire systems. Designed for clamping bird wire onto horizontal flanges of girders and beams. The Beam Clamp has a 21mm jaw which fits over flanges.

The Stick-on plastic bases support bird wire system and can be glued to any ledge surface. Posts that are 4mm are designed to be inserted into these Stick-on Bases.

Bird wire Standard Spring is to be used for tensioning bird wire on the post and bird wire system.  Standard Springs are installed at one end of each run of bird post and wire.

Bird wire Micro Spring is to be used for tensioning bird wire on the post and bird wire system.  Micro Springs are installed at one end of each run of bird post and wire.

Split pins are a discrete fixing that need to be inserted in a horizontally fitted anchor rivet. Once horizontally fitted attach the bird wire spring to the split pin. These Split Pins can also be used as an intermediate net fixing.

Bird wire crimps are used to secure the end of bird wire run. The bird wire is threaded through the crimp and then through the hole in the bird post, and back through the crimp.

A dual purpose easy to use tool designed for cutting bird wire and crimping the crimps. This multi-purpose tool is highly durable and high strength which is built to last.

The Bobson Metered Aerosol Dispenser AD-270M is a fully programmable metered spray unit designed to be installed in enclosed areas to release bursts of pyrethrum spray at regular intervals to assist in flying insect control. Designed to be used with 150g metered pyrethrum and fragrance cans.

A metered spray unit designed to be installed in enclosed areas to release bursts of pyrethrum spray at regular intervals to assist in flying insect control. Designed to be used with 150g metered pyrethrum and fragrance cans. Light sensor to detect day and night.

Rodent Bait Trays are economical, lightweight and sturdy trays suitable for holding a variety of liquid, pellet, block or types of baits. Its durable, plastic construction makes it easy to access, monitor and refill when servicing the bait tray.

Mouse Trap is ideal for commercial and residential clients, offering pest managers easy use on the job. It sets in one motion which also provides "no-touch" disposal of the captured mouse.

A small, triangular shaped tamper resistant mouse station with angled entry holes that allow it to fit flush against a wall or snug in a corner. The perfect size for fitting underneath pallets or appliances! Designed to hold Bell’s blox bait.