Sprayer Spare Parts & Maintenance

TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.

Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.

GFS Nail Kit 100 Pin + 1 Fuel Cell is a professionally designed spare accessory, ideal for a wide range of actuated nail guns.

Greenzone Termite Perimeter Barrier System is a physical termite risk management measure that is flexible in nature and is classed as a chemical barrier in a non-soil matrix. It is a once only treatment that is designed to last the economical life of the building.

This complete foam delivery system is built around a small and quiet compressor, a 3.8L stainless steel tank with a pressure gauge, a 2m hose, a rugged valve with a curved application tip.

The Versafoamer HH is an efficient foamer based on a standard B&G 3.8L tank, and is pressurised by hand.

A mini pneumatic foamer consisting of a 1.2 litre capacity poly tank with manual hand pump, polyurethane hose and 5mm diameter stainless steel injection nozzle.

Hand-held fogger designed to produce a range of spray droplets, from ULV (20 microns or less) to a power-mist (50 microns and larger) for indoor and outdoor applications.

The Dyna-Fog Golden Eagle portable thermal fogger is acclaimed in the industry for its effective and economical dispensing of oil-based chemical products.

Its ultra-lightweight design and ability to produce large volumes of dense fog make the Dyna-Fog Superhawk Thermal Fogger ideal for use in both local and remote areas.

Produces a range of spray droplets, from ULV (20 microns or less) to a mist (50 microns or larger), making it highly effective for pest management and most industrial, sanitisation and janitorial applications.

Patented termite-resistant weep hole guard manufactured from bifenthrin infused plastic. Proven to deter termite entry through existing weep holes for up to 2 years as part of a termite management plan.