Sprayer Spare Parts & Maintenance

The Bobson Metered Aerosol Dispenser AD-270M is a fully programmable metered spray unit designed to be installed in enclosed areas to release bursts of pyrethrum spray at regular intervals to assist in flying insect control. Designed to be used with 150g metered pyrethrum and fragrance cans.

A metered spray unit designed to be installed in enclosed areas to release bursts of pyrethrum spray at regular intervals to assist in flying insect control. Designed to be used with 150g metered pyrethrum and fragrance cans. Light sensor to detect day and night.

Fipforce Dust Termiticide and Insecticide contains 5g/kg of Fipronil which is toxic to insects by contact or ingestion. FipForce Dust is applied through a hand duster to help in the control of Termites, Nuisance ants and Cockroaches. It has a mineral based carrier which flows extremely well and is less susceptible to moisture than cellulose based dusts. Less moisture build-up means less clogging of the application procedure.

A pack of 1000 tapered corks with each cork measuring 18 x 11/8mm. Each cork is made from a single piece of natural cork.

The Altis 90-Degree Joiner is designed to suit Altis reticulation systems in termite management installations. This versatile 90-degree shaped provides a flexible trajectory for the dripper line to circulate around bay windows and other installation requirements. Its superior design includes sealing slip lock joints which offer a secure and easy-to-use fitting.

The Altis Square Pathway Trap is a pump-up fitting that allows the manifold pump to be concealed. This is a lockable trap and is the recommended pathway trap for use with Altis reticulation systems. It comes supplied with 2 screws and requires an Allen key to tighten.

The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.

The Altis 45 degree / 135 degree joint is a dripper line fitting suitable for routing the dripper line around bay windows. No clips are required as the slip lock joints provide the necessary seal required by the termite reticulation system.

The Altis Inline Joint is a dripper line fitting used to join two pieces of dripper line together in the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

The Altis Stop-End is a dripper line fitting used to on the dripper line at the end of a run of the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

The FlowZone Vortex Backpack Mister is the perfect solution for tackling hard-to-reach areas that need to be treated. Powered by a 40V/8AH lithium-ion battery, you can enjoy up to 50 minutes of continuous spraying on a single charge and 8m reach.

The FlowZone Vortex 40V Lithium Ion Battery is a powerful, rechargeable battery used in the Vortex Mist Blower. This battery allows for up to 50 minutes of continuous spray time on Eco Mode.