Sprayer Spare Parts & Maintenance

TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.

Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.

The Termstop Reticulation Kit features a chemical-resistant pressure pipe with emitter holes at regular spacings to help deliver pesticides around a treated zone or perimeter around buildings.

The Tramex Moisture Encounter 5 (ME5) is a dual-depth, non-destructive moisture meter for instant moisture measurement and evaluation.

The Altis 150mm x 50m Pre-Made External Perimeter Roll is for use with the Altis termite reticulation systems. This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet.

The Makita 18V Hammer Driver Drill Kit with 3.0Ah Battery and Charger is a brushless and cordless combo kit that includes 2x 3.0Ah Lithium ion batteries, optimum charger & carry case.

GFS Nail Kit 100 Pin + 1 Fuel Cell is a professionally designed spare accessory, ideal for a wide range of actuated nail guns.

FlowZone Quick Change 0-degree Pin Nozzle for high hard to reach areas lets you get the maximum reach out of your chosen FlowZone sprayer. 

FlowZone Quick-Connect 25° Fan Nozzle is a replacement 25-degree fan nozzle that sprays a flat fan pattern at a 25-degree angle.

Get all the spray patterns you need in one handy nozzle, this quick connect nozzle fits straight up to FlowZone models. Spray patterns include 0 deg pin, 25 deg fan, 40 deg fan and 2 soap for detergent applications. 

A nickel plated brass quick-connect nozzle that can be adjusted from a misting cone spray to a conical spray to a thicker jet stream.

A pressure-washer style spray gun with a Viton™ Seal, threaded 11/16" hose connection and female quick-connect wand / nozzle output connection.