Sprayer Spare Parts & Maintenance

The Altis 150mm x 50m Pre-Made External Perimeter Roll is for use with the Altis termite reticulation systems. This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet.

Hand-held fogger designed to produce a range of spray droplets, from ULV (20 microns or less) to a power-mist (50 microns and larger) for indoor and outdoor applications.

The Dyna-Fog Golden Eagle portable thermal fogger is acclaimed in the industry for its effective and economical dispensing of oil-based chemical products.

Its ultra-lightweight design and ability to produce large volumes of dense fog make the Dyna-Fog Superhawk Thermal Fogger ideal for use in both local and remote areas.

Produces a range of spray droplets, from ULV (20 microns or less) to a mist (50 microns or larger), making it highly effective for pest management and most industrial, sanitisation and janitorial applications.

The Bobson Metered Aerosol Dispenser AD-270M is a fully programmable metered spray unit designed to be installed in enclosed areas to release bursts of pyrethrum spray at regular intervals to assist in flying insect control. Designed to be used with 150g metered pyrethrum and fragrance cans.

A metered spray unit designed to be installed in enclosed areas to release bursts of pyrethrum spray at regular intervals to assist in flying insect control. Designed to be used with 150g metered pyrethrum and fragrance cans. Light sensor to detect day and night.

The Altis 90-Degree Joiner is designed to suit Altis reticulation systems in termite management installations. This versatile 90-degree shaped provides a flexible trajectory for the dripper line to circulate around bay windows and other installation requirements. Its superior design includes sealing slip lock joints which offer a secure and easy-to-use fitting.

The Altis Square Pathway Trap is a pump-up fitting that allows the manifold pump to be concealed. This is a lockable trap and is the recommended pathway trap for use with Altis reticulation systems. It comes supplied with 2 screws and requires an Allen key to tighten.

The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.

The Altis 45 degree / 135 degree joint is a dripper line fitting suitable for routing the dripper line around bay windows. No clips are required as the slip lock joints provide the necessary seal required by the termite reticulation system.

The Altis Inline Joint is a dripper line fitting used to join two pieces of dripper line together in the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.