Electric Bird Deterrent System

TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.

Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.

The stainless steel wire rope is 2mm diameter is appropriate for use in installing and erecting bird netting.

Hog rings are used to attach bird netting to the net cable. Hog rings can also used to join net seams and secure zips into the net. 

GFS Nail Kit 100 Pin + 1 Fuel Cell is a professionally designed spare accessory, ideal for a wide range of actuated nail guns.

Greenzone Termite Perimeter Barrier System is a physical termite risk management measure that is flexible in nature and is classed as a chemical barrier in a non-soil matrix. It is a once only treatment that is designed to last the economical life of the building.

Patented termite-resistant weep hole guard manufactured from bifenthrin infused plastic. Proven to deter termite entry through existing weep holes for up to 2 years as part of a termite management plan.

The galvanised wire rope is 2mm diameter is appropriate for use in installing and erecting bird netting.

Aluminium Ferrule 2.5mm is the perfect way to secure a 2mm Galvanised wire rope.

Copper Ferrule 2.5mm is the perfect way to secure a 2mm Stainless Steel wire rope.

The Ratchet Crimper tool is a heavy-duty tool designed for combining and sealing two elements together. The Ratchet Crimper tool is ideal for use with bird wire ferrules in bird netting installations.

These N7 Wire Cutters are ideal for cutting Galvanised or stainless steel wires when installing or erecting bird netting.