Search results for: 'roof rat brands seal'

Sundstrom SR510 Particle Filter (P3) or SR 210/310, provides P3 protection with full face masks and P2 protection with a half mask due to the limitation of the face piece.

The StarrdustPRO ‘ONE-SHOT’ is a ready-to-use pod that screws straight onto the StarrdustPRO DUCKBILL Duster head. It is prefilled with 400 grams of premium StarrdustPRO Industrial Strength dusting powder.

The Protecta LP Rodent Bait Station is a triangular-shaped bait station that fits in corners and along walls where rodents travel. Its “Low Profile” makes it ideal to use indoors under pallets and in other tight baiting locations. It holds all types of bait.

Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.

The Sundstrom SR100 Half Face Respirator is made of silicone and equipped with two exhalation valves, which ensures very low exhalation resistance.. The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist.

Homeguard Termiflex Termiticidal Adhesive and Sealant is a unique sealant / builder's adhesive that has been impregnated with Biflex. Use Homeguard Termiflex to hold Homeguard sheets in place until other building elements are installed, by fastening joints and corners corners and holding the sheet to bricks, blocks, concrete and other buliding materials in the gaps between nails and other similar fastening devices.

Glue trap for mice and insects. Trapper MAX has more than 40% larger surface area than the TRAPPER LTD. Pre baited glue formulation.Trapper MAX can be used as a flat trap or folded into a covered trap. 195mm x 135mm.

Barbed 25mm Tee for termite reticulation systems.

2.2cm brass and teflon seat to suit AA30 and AAB30 Gunjet spray guns

Director 25mm Tail to 1 inch BSP for use with termite reticulation systems.

Magnetic adaptor designed for use with the GFS Gas Actuated Concrete or Steel Nail Gun

This is the pull slider for the zipper. A zipper is required before installing the pull slider.