Search results for: 'fitted pro 100'

TRAPPER Monitor & Insect Trap is a non-poisonous glue trap that captures and monitors insects. PMPs can use it to accurately determine the location, species and severity of insect infestations.

FlowZone Comfort Straps provide next level comfort when paired with our Pro-Series backpack sprayers: Storm, Storm Microburst, and Big Kahuna.

The Multi Manifold Single/Double 150mm Take Off is expertly designed to connect your Altis Termite Reticulation System to a pump-up point, making it ideal for external perimeter installations covering up to 100 linear meters.

The Sundstrom SR218 A2 Gas Filter provides protection against organic vapours (filter class A2 - high capacity). It is designed to be used in conjunction with Sundström SR100, SR200 and SR500 respirators.

Standard sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. Install these bird posts by knocking them into Anchor Rivets. These posts need to be positioned at 1.5m intervals along the ledge. These posts are used for the lead. These posts will be supplied in packs of 100.

Made from hard-wearing plastic these notices need to be fitted near Avishock installations to help prevent unintentional shocks. Text: "WARNING – Electrified Flex-Track – Isolate before access."

A small, triangular shaped tamper resistant mouse station with angled entry holes that allow it to fit flush against a wall or snug in a corner. The perfect size for fitting underneath pallets or appliances! Designed to hold Bell’s blox bait.

Homeguard Collars are impregnated with bifenthrin. The collars physically stop attacking termites entering a structure via penetration pipes and will also kill termites that contact the collar and repel them away from the penetration. Available in 40, 50, 80 and 100 mm diameters.

The Altis 150mm x 50m Pre-Made External Perimeter Roll is for use with the Altis termite reticulation systems. This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet.

The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.

The Protecta RTU Mouse Rodent Bait Station is a small, triangular-shaped tamper-resistant mouse station with angled entry holes that allow it to fit flush against a wall or snug in a corner. The perfect size for fitting underneath pallets or appliances! Designed to hold Bell’s rodent blox bait.

The Emergency Spill Response Kit is designed for use with fuel, water-based and chemical spills. Compact and conveniently designed to fit in a satchel, it fits perfectly in your vehicle to ensure you're always prepared for unexpected spills on the job.