Search results for: 'strip soft injector body board top'

Drager X-plore 5500 Full Face Respirator is a twin-filter respirator for environments where not only increased respiratory protection is required, but also a clear vision is mandatory.

A pack of 50 Replacement Killgerm AF Demi-Diamond Fruit Fly Glue Board Pads for use with the Killgerm AF Demi-Diamond Fruit Fly Traps.

ProSafe Leather Rigger Gloves are general purpose gloves made from cow-grain leather and features a winged thumb design.

Bird wire Micro Spring is to be used for tensioning bird wire on the post and bird wire system.  Micro Springs are installed at one end of each run of bird post and wire.

Killgerm AF Demi-Diamond Clothes Moth (Tineola Bisselliella) Glue Pads is an adhesive board that targets clothes moths with a pheromone attractant using slow-release matrix technology.

Bird wire Standard Spring is to be used for tensioning bird wire on the post and bird wire system.  Standard Springs are installed at one end of each run of bird post and wire.

The Gunjet 31 Brass Spray Gun operates with pressure up to 500 PSI and flow rates up to 19L/min. It has a 1/4 NPS (M) inlet connection for spray tips.

The Makita 24V Blower UB1103 is a lightweight and powerful blower for a wide range of cleaning and dusting applications. It features a 600W* motor for 4.1m³/min of air volume.

HomeGuard Protectacote Primer is designed to be applied before HomeGuard Protectacote. Apply a single coat of the primer to run of masonry, concrete or fibre board prior to applying HomeGuard Protectacote Termite and Waterproof Barrier. All surfaces must be clean and free of grease and dirt before application.

Go-Plugs Pebbles in 8mm diameter are small plastic plugs that offer a fast, efficient, and professional solution for sealing drill holes during termite treatment and other applications. The Pebble Versions are specially designed for exposed aggregate slabs. Traditionally, plugging drill holes required wadding and concrete mortar, which can be time-consuming and difficult to match with existing surfaces. 

Go-Plugs are small plastic plugs that offer a fast, efficient, and professional solution for sealing drill holes during termite treatment and other applications. Traditionally, plugging drill holes required wadding and concrete mortar, which can be time-consuming and difficult to match with existing surfaces.

Go-Plugs in 13mm diameter are small plastic plugs that offer a fast, efficient, and professional solution for sealing drill holes during termite treatment and other applications. Traditionally, plugging drill holes required wadding and concrete mortar, which can be time-consuming and difficult to match with existing surfaces.