Search results for: 'use spray rice fog steel'

Standard sized bird posts for Bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. The posts are designed to be inserted into Stick-on Bases. These posts are designed for the leading edge of a ledge. The bird post is 4mm diameter and is made with stainless steel.

B&G TS-792 is a stainless steel siphon tube for 2 gallon B&G sprayers that is 304mm long.

A discreet intermediate fixing that can be used for screwing into timber or masonry. Ideal for installing and erecting bird netting.

GFS1000 Concrete & Steel TRAK nailing gun is ideal for installing termite barriers during pre-construction, smooth edge, electrical & data clips, channel & track, steel stud to block and concrete walls, and timber battens to concrete and block walls.

SSF in x SSM out 1 to 2.5m extension for Spraying Systems Gun

SSF in x SSM out 950 to 1760 mm extension for Spraying Systems Gun

Angle Brackets are Intermediate Fixings for Cladding, masonry or metal and are fixed in position using Self Drill Screws or Self Tap Screws. 

Hog rings are used to attach bird netting to the net cable. Hog rings can also used to join net seams and secure zips into the net. 

Bird wire Standard Spring is to be used for tensioning bird wire on the post and bird wire system.  Standard Springs are installed at one end of each run of bird post and wire.

B&G’s Pressurising Tank Top (PTT) replaces the traditional pump mechanism used in B&G Primeline stainless steel sprayers, eliminating the need to stop and pump during a service call. 

ALL CLEAR® DS is specially formulated to remove crop protection chemical deposits and other debris, including oily substances from tanks, hoses, booms, transfer and mixing systems, filters, screens and nozzles.

Standard sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. Install these bird posts by knocking them into Anchor Rivets. These posts need to be positioned at 1.5m intervals along the ledge. These posts are used for the lead. These posts will be supplied in packs of 100.