Search results for: 'seal seal injector body board top'

The TeeJet Adjustable Conejet Spray Nozzle Tip is available in a range of sizes and adapts to many spray lances and TeeJet Gunjets. The nozzle tip design makes it well-suited for use on demanding applications including backpack sprayers. 

Bird wire Micro Spring is to be used for tensioning bird wire on the post and bird wire system.  Micro Springs are installed at one end of each run of bird post and wire.

HomeGuard Protectacote Primer is designed to be applied before HomeGuard Protectacote. Apply a single coat of the primer to run of masonry, concrete or fibre board prior to applying HomeGuard Protectacote Termite and Waterproof Barrier. All surfaces must be clean and free of grease and dirt before application.

Bird wire Standard Spring is to be used for tensioning bird wire on the post and bird wire system.  Standard Springs are installed at one end of each run of bird post and wire.

The Gunjet 31 Brass Spray Gun operates with pressure up to 500 PSI and flow rates up to 19L/min. It has a 1/4 NPS (M) inlet connection for spray tips.

The StarrdustPRO ‘ONE-SHOT’ is a ready-to-use pod that screws straight onto the StarrdustPRO DUCKBILL Duster head. It is prefilled with 400 grams of premium StarrdustPRO Industrial Strength dusting powder.

The Silvan ProGrade 5L hand sprayer is robust in construction for extended life and easy to see volume in the tank. It has an efficient pump and large handle or easy operation and servicing

Sundstrom SR510 Particle Filter (P3) or SR 210/310, provides P3 protection with full face masks and P2 protection with a half mask due to the limitation of the face piece.

Glueboard for mice and insects to suit Protector Pest Monitor Station and Trapper multi-catch mouse trap. 165mm x 100mm.

The Ledlenser P7R Core Torch is a versatile and sleekly designed flashlight offering exceptional power.

Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.

The Sundstrom SR100 Half Face Respirator is made of silicone and equipped with two exhalation valves, which ensures very low exhalation resistance.. The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist.