Search results for: 'seal solo injector body brands to'
- Silvan ProGrade 5L Hand Sprayer
The Silvan ProGrade 5L hand sprayer is robust in construction for extended life and easy to see volume in the tank. It has an efficient pump and large handle or easy operation and servicing
- Sundstrom SR510 P3 Particle Filter
Sundstrom SR510 Particle Filter (P3) or SR 210/310, provides P3 protection with full face masks and P2 protection with a half mask due to the limitation of the face piece.
- Starrdust Pro Duckbill + ‘One-Shot’ 400g
20g/kg Permethrin 40:60, 5g/kg Triflumuron
The StarrdustPRO ‘ONE-SHOT’ is a ready-to-use pod that screws straight onto the StarrdustPRO DUCKBILL Duster head. It is prefilled with 400 grams of premium StarrdustPRO Industrial Strength dusting powder.
- Demand 100CS Insecticide
100g/L Lambda-Cyhalothrin
Demand 100CS is a cost effective and long lasting insecticide for the controls of ants, cockroaches, fleas, flies, mosquitoes, silverfish and spiders for up to up to 12 months indoors and up to 3 months outdoors. It can be applied to foliage for up to 14 weeks of mosquito control.
- Tensorgrip C40 Hi-Tack Spray Adhesive
Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.
- Sundstrom SR100 Half Face Respirator
The Sundstrom SR100 Half Face Respirator is made of silicone and equipped with two exhalation valves, which ensures very low exhalation resistance.. The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist.
- Homeguard Termiflex Termiticidal Adhesive and Sealant
2g/kg Bifenthrin
Homeguard Termiflex Termiticidal Adhesive and Sealant is a unique sealant / builder's adhesive that has been impregnated with Biflex. Use Homeguard Termiflex to hold Homeguard sheets in place until other building elements are installed, by fastening joints and corners corners and holding the sheet to bricks, blocks, concrete and other buliding materials in the gaps between nails and other similar fastening devices.
-
- Control Seat 7490 for Spray Guns
2.2cm brass and teflon seat to suit AA30 and AAB30 Gunjet spray guns
- Director 25mm Tail to 1 inch BSP
For Termite Reticulation Systems
Director 25mm Tail to 1 inch BSP for use with termite reticulation systems.
- GFS Magnetic Adaptor for Nail Gun
Magnetic adaptor designed for use with the GFS Gas Actuated Concrete or Steel Nail Gun
- Single Pull Slider Metal for Zipper
This is the pull slider for the zipper. A zipper is required before installing the pull slider.