Search results for: 'used spray rat fox steel'

B&G TS-792 is a stainless steel siphon tube for 2 gallon B&G sprayers that is 304mm long.

Hog rings are used to attach bird netting to the net cable. Hog rings can also used to join net seams and secure zips into the net. 

Bird wire Standard Spring is to be used for tensioning bird wire on the post and bird wire system.  Standard Springs are installed at one end of each run of bird post and wire.

GFS1000 Concrete & Steel TRAK nailing gun is ideal for installing termite barriers during pre-construction, smooth edge, electrical & data clips, channel & track, steel stud to block and concrete walls, and timber battens to concrete and block walls.

SSF in x SSM out 1 to 2.5m extension for Spraying Systems Gun

SSF in x SSM out 950 to 1760 mm extension for Spraying Systems Gun

Angle Brackets are Intermediate Fixings for Cladding, masonry or metal and are fixed in position using Self Drill Screws or Self Tap Screws. 

SX Fix n Go Pads are a ready-to-use rodent station tether fixing system to secure rat or mouse bait stations to a wall, floor, or surface, whilst allowing the box to be lifted for cleaning.

Enhance workplace safety with a high-visibility yellow A-Frame Safety sign. This durable and weather-resistant sign contains the message "Warning: Approved Pesticide in Use. No Authorised Entry" to ensure that crucial safety information is easily seen and understood by all.

The Rodent Bait Station Cables are a ready-to-use rodent station tether fixing system to secure rat or mouse bait stations to a wall, floor, or surface, whilst allowing the box to be lifted for cleaning.

B&G’s Pressurising Tank Top (PTT) replaces the traditional pump mechanism used in B&G Primeline stainless steel sprayers, eliminating the need to stop and pump during a service call. 

Standard sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. Install these bird posts by knocking them into Anchor Rivets. These posts need to be positioned at 1.5m intervals along the ledge. These posts are used for the lead. These posts will be supplied in packs of 100.