General Insecticides

The Altis 90-Degree Joiner is designed to suit Altis reticulation systems in termite management installations. This versatile 90-degree shaped provides a flexible trajectory for the dripper line to circulate around bay windows and other installation requirements. Its superior design includes sealing slip lock joints which offer a secure and easy-to-use fitting.

The Altis Square Pathway Trap is a pump-up fitting that allows the manifold pump to be concealed. This is a lockable trap and is the recommended pathway trap for use with Altis reticulation systems. It comes supplied with 2 screws and requires an Allen key to tighten.

The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.

The Altis 45 degree / 135 degree joint is a dripper line fitting suitable for routing the dripper line around bay windows. No clips are required as the slip lock joints provide the necessary seal required by the termite reticulation system.

The Altis Inline Joint is a dripper line fitting used to join two pieces of dripper line together in the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

The Altis Stop-End is a dripper line fitting used to on the dripper line at the end of a run of the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

The Rega Adaptor for the B&G Pressurised Tank Top is custom-designed to bridge the gap between your Rega Spray Unit and the new battery-powered B&G Pressurising Tank Top, allowing for a seamless and efficient upgrade. This precision-engineered adaptor makes it possible to install the B&G Pressurising Tank on your Rega Spray Unit, unlocking the full potential of your spraying equipment.

The Herbie Clip 25mm is the ultimate injection-moulded fiberglass polypropylene hose clamp for reliability and efficiency with the Altis termite reticulation system.

When you need a superior alternative to metal clamps, the Herbie Clip 25mm stands out as the go-to solution. Engineered with a patented double jaw design, this innovative hose clamp delivers exceptional strength, guaranteeing up to 200 psi pressure resistance. Unlike traditional metal clamps, the Herbie Clip is heat and UV stabilised, ensuring it remains impervious to harsh environmental conditions and contaminants, making it ideal for long-term use in challenging environments.

The Altis Purple Manifold Pipe, with a 25mm diameter, is specifically engineered for use with the Altis Termite Reticulation System.

This high-quality pipe ensures reliable distribution of termiticides, creating an effective barrier against termites.

Available for purchase by the metre, it offers flexibility for both small and large installations, ensuring that your system is tailored perfectly to your needs.

The Multi Manifold Single/Double 150mm Take Off is expertly designed to connect your Altis Termite Reticulation System to a pump-up point, making it ideal for external perimeter installations covering up to 100 linear meters.

The Altis 25mm tail x 20mm BSP Director is for use with the Altis Termite Reticulation System.

The Altis Black 25mm 90 Degree Elbow Joiner is designed for use with the Altis Termite Reticulation System.