Termidor Foam Termiticide and Insecticide

Product Code: CTERF.5
No Review
Availability: In stock
Add to Wish List
There is no address saved in your account.

Termidor Foam is a robust dry foam formulation that expands to fill termite nests, galleries and other active workings. Termidor Foam is specifically developed for stage 1 colony elimination with a formulation that maximises the Termidor Transfer Effect.

With an unsurpassed thirty-to-one expansion ratio, Termidor Foam won’t go to water in the termite workings like other foams can. Termidor Foam stays in place as the perfect product for Stage 1 colony elimination.

Key Benefits of Termidor Foam

  • Flexible, reliable and fast termite control
  • Developed for stage 1 colony elimination with a formulation that maximises the Termidor Transfer Effect
  • Foam builds and holds in place ensuring the active is evenly distributed
  • Foam formulation ensures minimal runoff and ease of application
  • Cost effective and flexible solution for termite and ant control
  • Contains active 0.05g/kg Fipronil

How does Termidor Foam work?

Termidor® Foam has been specifically formulated as a dry foam which builds and holds in place, ensuring the active is evenly distributed throughout the treated area. With the added advantage of an unsurpassed 30:1 expansion ratio, Termidor Foam will permeate intricate termite workings and carton material without dissipating and turning to water as other foams tend to.

A carefully calibrated 0.05 g/L concentration of the Termidor active ensures that Termidor Foam does not kill too quickly, allowing time for the powerful Termidor Transfer Effect to go to work.

Termidor Foam should be applied directly to termite nests (including bivouacs) in trees, stumps, posts, power poles, mounds and wall cavities. Termidor Foam can also be applied to termite activity when the nest cannot be located, such as active workings in timber and wall cavities and in bait stations.

Ant nests and enclosed ant harbourages may also be treated with Termidor Foam.

How to use and apply Termidor Foam

Situation Pest Rate Critical Comments

Termite nests in trees, stumps, posts, power poles, mounds and wall cavities. Termite activity when the nest cannot be located. E.g. active workings in timber, wall cavities.

Subterranean termites including but not limited to: Coptotermes acinaciformis, Mastotermes darwiniensis, Nasutitermes spp., Schedorhinotermes spp. Drywood termites including: Incisitermes spp.

This product is a ready-to use insecticide formulation. When dispensed, the formulation rapidly expands generating a dry foam with an expansion ratio of approximately 30:1, with 30g of product being dispensed in approximately 5 seconds producing about 1L of foam.

Shake well before using. Remove the outer cap and snap the actuator into place. Remove the finger pad cover. After using, replace the finger pad cover. Apply for approximately 10–30 seconds or until foam back flows per injection point. After
application, hold the injector tip in place for approximately 5 sec to allow the product within the injector tube to dispense into the treatment area.


Drilling hole(s) may be required to gain access to the known or suspected gallery, harbourage or void. Care should be taken not to drill holes too close together or foam will emerge from other holes. It is recommended that drill holes be taped over when not in use.

Ant nests and enclosed harbourages

Nuisance Ants, including but not limited to: Argentine ant (Linepithema humile), black house ant (Ochetellus glaber), meat ants  (Iridomyrmex purpureus), coastal brown ants (Pheidole megacephala), pavement ants (Tetramorium sp.)

This product is a ready-to use insecticide formulation. When dispensed, the formulation rapidly expands generating a dry foam with an expansion ratio of approximately 30:1, with 30g of product being dispensed in approximately 5 seconds producing about 1L of foam.

Shake well before using. Remove the outer cap and snap the actuator into place. Remove the finger pad cover. After using, replace the finger pad cover. Apply for approximately 5–10 seconds or until foam back flows. After application, hold the
injector tip in place for approximately 5 sec to allow the product within the injector tube to dispense into the treatment area.


Drilling hole(s) may be required to gain access to the known or suspected harbourage or void. Care should be taken not to drill holes too close together or foam will emerge from other holes. It is recommended that drill holes be taped over when not in use.

© Globe Pest Solutions 2024, a division of Australian Agribusiness