Termidor High Pressure Device

Maximise your termite protection with the cutting-edge Termidor High Pressure Device (HPD). The Termdor High Pressure Device is specifically designed to be used for applications of Termidor HE by allowing for hole spacings of up to 600mm, ensuring the same unparalleled coverage with fewer drill points.

Developed in collaboration with BASF, the Termidor High Pressure Device operates at a minimum pressure of 800psi, harnessing the power of Termidor HE's patented Advanced Polymer Technology™. This synergy between Termidor HE and the high-pressure device offers pest control professionals a revolutionary way to apply termite treatments, reducing the number of holes needed and minimising disruption to structures.

The Termidor High Pressure Deice is designed to be easy to use - simply add the HPD between your current pump and the injector.

Key Benefits of Termidor High Pressure Device:

• Enhanced Performance: Achieve superior termite protection with the new 600mm wider hole spacings, ensuring effective distribution of Termidor HE.
• Homeowner Satisfaction: Reduce structural impact, leading to higher customer satisfaction.
• Increased Efficiency: Cover larger areas more efficiently, cutting down on application time and labour costs.
• Cost Savings: With fewer holes to drill, save on equipment wear and operational expenses. New or pre-drilled termite treatments can see labor cost reductions of 50%-75%, even when existing spacings are 200mm-300mm.

Inclusions with the Termidor High Pressure Device:

• Preset High-Pressure Pump: Delivers consistent performance with a Honda motor.
• 4 Injector Tips Included:
  • 5mm x 150mm
  • 6.5mm x 200mm
  • 8mm x 200mm
  • 9.5mm x 200mm.
• 15m High-Pressure Hose: Connects easily to a J-foot injector with a high-pressure gun. The provided 15m high pressure hose can only be used with this device.
• Hansen Plug 2P Female: Existing vehicle hose Hansen male snaps into machine
• Hansen Plug 2P Male fittings on the machine for high pressure hose to high pressure gun
• High pressure gun provided with the device must be used - other old or lower pressure guns cannot be used.

Specifications for the Termidor High Pressure Device:

• Pressure: 800 - 1000 psi (set at 1000psi)
• Delivery: Will pump approximately 10L per minute (or approximately 20 seconds for 3.3L).
• Engine: Honda Gx200 6.5 hp
• Fuel: Petrol
• Mobile Unit: Flexible
• Approximately 30kg in weight
• High pressure, low volume
• Connects to existing motor and pump on the back of a ute
• Can be used as a standalone vehicle set up
• Inflow pressure (minimum to maximum): 50-100 psi
• Inflow rate: >15L per minute
•  All units have been pressure tested and regulator tethered to maintain minimum pressure of 800psi. The user can determine if the pressure is not correct if the output (via their calibration or flow meter) is below 8L per minute.

Warranty Information:

• 3 year warranty on the motor
• 6 month warranty on the pump for defects. Warranty does not cover moving parts.

Important Information when using the Termidor High Pressure Device:

• The vehicle spray unit pressure must not exceed a maximum of 100psi when connecting to the HPD unit
• The flow rate from the vehicle spray unit must be greater than 15L per minute
• The HPD unit is calibrated and preset - do not adjust the pressure regulator
• For safety, please make sure the pressure is released before removing the spray gun or injector from a hole
• For maintenance, keep the snap fitting lubricated
• Flush out with fresh water after each use

Upgrade your pest control arsenal with the Termidor High Pressure Device, a cost-effective solution for achieving superior termite protection with less effort.