Termite Detection & Application Equipment

Larger sized bird posts for bird wire systems to protect against pigeons. The double headed bird post is designed for medium pressure infestation. These posts can be installed by knocking them into Anchor Rivets.

Bird posts for bird wire systems to protect against pigeons. The gutter post is designed for clamping bird wire onto gutters and vertical flanges. The gutter post has a 21mm jaw which fits over the gutter.

Beam Clamp & Post is a tool designed for bird wire systems. Designed for clamping bird wire onto horizontal flanges of girders and beams. The Beam Clamp has a 21mm jaw which fits over flanges.

The Stick-on plastic bases support bird wire system and can be glued to any ledge surface. Posts that are 4mm are designed to be inserted into these Stick-on Bases.

Bird wire Standard Spring is to be used for tensioning bird wire on the post and bird wire system.  Standard Springs are installed at one end of each run of bird post and wire.

Bird wire Micro Spring is to be used for tensioning bird wire on the post and bird wire system.  Micro Springs are installed at one end of each run of bird post and wire.

Split pins are a discrete fixing that need to be inserted in a horizontally fitted anchor rivet. Once horizontally fitted attach the bird wire spring to the split pin. These Split Pins can also be used as an intermediate net fixing.

Bird wire crimps are used to secure the end of bird wire run. The bird wire is threaded through the crimp and then through the hole in the bird post, and back through the crimp.

A dual purpose easy to use tool designed for cutting bird wire and crimping the crimps. This multi-purpose tool is highly durable and high strength which is built to last.

Fipforce Dust Termiticide and Insecticide contains 5g/kg of Fipronil which is toxic to insects by contact or ingestion. FipForce Dust is applied through a hand duster to help in the control of Termites, Nuisance ants and Cockroaches. It has a mineral based carrier which flows extremely well and is less susceptible to moisture than cellulose based dusts. Less moisture build-up means less clogging of the application procedure.