Termite Detection & Application Equipment

HomeGuard Protectacote Primer is designed to be applied before HomeGuard Protectacote. Apply a single coat of the primer to run of masonry, concrete or fibre board prior to applying HomeGuard Protectacote Termite and Waterproof Barrier. All surfaces must be clean and free of grease and dirt before application.

HomeGuard Protectacote, in conjunction with the HomeGuard Precision Termite Management System (the HomeGuard System), forms a continuous waterproof and termite resistant barrier around the perimeter of new slab-on-ground structures and extensions to existing structures.

HomeGuard DPC provides total termite protection for the building perimeters. HomeGuard DPC (Damp Proof Course) is a tough, 500 micron, embossed polymer sheeting impregnated with Bifenthrin and when used as a component of a termite management system, meet the requirements of AS 3660.1 approved in accordance with and AS 3660.3 – Termite Management.

HomeGuard PB provides total protection for all building perimeters from subterranean termites. HomeGuard PB is a high impact, 300 micron, embossed polymer sheeting product that is impregnated with Bifenthrin and when used as a component of a termite management system, meet the requirements of AS 3660.1 approved in accordance with and AS 3660.3 – Termite Management.

HomeGuard® GT is a plastic granular material termite protection product, impregnated with Bifenthrin. HomeGuard® GT is designed to prevent concealed entry of subterranean termites through perimeter cavities and construction voids.

Homeguard's unique flexible collars are impregnated with bifenthrin. They physically stop attacking termites entering a structure via penetration pipes; they will also kill termites that contact the collar and repel them away from the penetration. Available in 100mm, 80mm, 50mm, 40mm, 25mm

Homeguard Collars are impregnated with bifenthrin. The collars physically stop attacking termites entering a structure via penetration pipes and will also kill termites that contact the collar and repel them away from the penetration. Available in 40, 50, 80 and 100 mm diameters.

PCO Insect Bait Station is designed to assist with the placement of insecticidal bait, particularly gel formulations. This bait station encourages longer effectiveness from bait placements as dust and other contaminants are kept off.

VESPEX European Wasp Lure is a specially formulated, non-toxic liquid lure which is attractive to European Wasp (Vespula germanica), but NOT to bees. VESPEX European Wasp Lure is suitable for use in wasp dome traps, bottle traps, disposable wasp bags or other suitable traps where insects enter and are unable to escape.

The Vespex Dominator Bottle Trap is used to monitor or directly reduce populations of insects or other arthropods by trapping individuals and killing them.

The Vespex European wasp baiting kit contains all the essential components in order to remote bait European wasp nest when the nests are unable to be located and directly treated with chemicals.

Cidetrak IMM is a high load pheromone dispenser used to help in the control of stored product moths. Cidetrak IMM Dispenser Technology provides a 3-way effect on mating that dramatically reduces larvae and damage to stored goods.