Termite Reticulation Systems - Industrial - Ready to Use - Yes

HomeGuard TMB provides total termite protection for the building under slab and contains 1g/kg Bifenthrin.

HomeGuard Protectacote Primer is designed to be applied before HomeGuard Protectacote. Apply a single coat of the primer to run of masonry, concrete or fibre board prior to applying HomeGuard Protectacote Termite and Waterproof Barrier. All surfaces must be clean and free of grease and dirt before application.

HomeGuard Protectacote, in conjunction with the HomeGuard Precision Termite Management System (the HomeGuard System), forms a continuous waterproof and termite resistant barrier around the perimeter of new slab-on-ground structures and extensions to existing structures.

HomeGuard DPC provides total termite protection for the building perimeters. HomeGuard DPC (Damp Proof Course) is a tough, 500 micron, embossed polymer sheeting impregnated with Bifenthrin and when used as a component of a termite management system, meet the requirements of AS 3660.1 approved in accordance with and AS 3660.3 – Termite Management.

HomeGuard PB provides total protection for all building perimeters from subterranean termites. HomeGuard PB is a high impact, 300 micron, embossed polymer sheeting product that is impregnated with Bifenthrin and when used as a component of a termite management system, meet the requirements of AS 3660.1 approved in accordance with and AS 3660.3 – Termite Management.

HomeGuard® GT is a plastic granular material termite protection product, impregnated with Bifenthrin. HomeGuard® GT is designed to prevent concealed entry of subterranean termites through perimeter cavities and construction voids.

Homeguard's unique flexible collars are impregnated with bifenthrin. They physically stop attacking termites entering a structure via penetration pipes; they will also kill termites that contact the collar and repel them away from the penetration. Available in 100mm, 80mm, 50mm, 40mm, 25mm

Homeguard Collars are impregnated with bifenthrin. The collars physically stop attacking termites entering a structure via penetration pipes and will also kill termites that contact the collar and repel them away from the penetration. Available in 40, 50, 80 and 100 mm diameters.

Biflex Ultra-Lo-Odour Termiticide and Insecticide is a cost-effective, broad spectrum, long residual, liquid insecticide and termiticide for use as an internal and external treatment of a wide range of pests.

Biflex AquaMax is the first ever Professional Strength, multi-insecticide and termiticide. Effective on a wide range of common household pests and all termite species in Australia.

TERM-seal PRM Active (poly reinforced membrane) is a specialised termite and moisture proof sheeting that doubles as a damp course over masonry to provide a continuous physical termite barrier for all types of construction.

TERM-seal soft annular collars are used to protect slab penetrations and prevent the entry of Termites. These collars are supplied pre-cut to fit 40mm (water), 40mm (elect), 50mm, 65mm, 80mm, and 100mm pipe and conduit sizes.