Termite Reticulation Systems

Screw CP9034-2-IZP Spraying Systems 31 Spray Gun

This Spraying Systems O Ring is specially designed to suit 5780 nozzles.

The coated wire is suspended between bird wire posts to prevent large birds from landing. Bird wire is a low-profile bird deterrent system ideal for handrails, ledges, rooftops, parapet walls and other areas large birds are landing.

The coated wire is suspended between bird wire posts to prevent large birds from landing. Bird wire is a low-profile bird deterrent system ideal for handrails, ledges, rooftops, parapet walls and other areas large birds are landing.

Larger sized bird posts for bird wire systems to protect against pigeons. The double headed bird post is designed for medium pressure infestation. These posts can be installed by knocking them into Anchor Rivets.

Bird posts for bird wire systems to protect against pigeons. The gutter post is designed for clamping bird wire onto gutters and vertical flanges. The gutter post has a 21mm jaw which fits over the gutter.

Beam Clamp & Post is a tool designed for bird wire systems. Designed for clamping bird wire onto horizontal flanges of girders and beams. The Beam Clamp has a 21mm jaw which fits over flanges.

The Stick-on plastic bases support bird wire system and can be glued to any ledge surface. Posts that are 4mm are designed to be inserted into these Stick-on Bases.

Bird wire Standard Spring is to be used for tensioning bird wire on the post and bird wire system.  Standard Springs are installed at one end of each run of bird post and wire.

Bird wire Micro Spring is to be used for tensioning bird wire on the post and bird wire system.  Micro Springs are installed at one end of each run of bird post and wire.

Split pins are a discrete fixing that need to be inserted in a horizontally fitted anchor rivet. Once horizontally fitted attach the bird wire spring to the split pin. These Split Pins can also be used as an intermediate net fixing.

Bird wire crimps are used to secure the end of bird wire run. The bird wire is threaded through the crimp and then through the hole in the bird post, and back through the crimp.