Trelona Advance Termite Concrete Station

A blank sleeve installed in concrete cored stations to hold monitoring or bait components.

General instructions for the installation of Trelona Advance Termite Concrete Bait Stations

When putting stations into areas where concrete or tarmac is present, this will require a core to be cut through the surface to gain access for the in-concrete station to be installed. Concrete or tarmac cutting should be carried out by someone trained in this field; you may use a professional concrete cutting company to do this service on your behalf. It is recommended when cutting through concrete that utility services are identified before commencing this activity.

Once the core is cut you may need to remove some additional soil from under the concrete to make room for the Advance Concrete Bait Station (CBS). Trial fit the station to check if the sleeve drops down into the void. The sleeve will have to be at least 5mm below the depth of the base of the steel cap as they are a similar diameter and will stop the cap fitting flush. If the sleeve goes down too deep, or there is some soil subsidence, it may be necessary to add some soil back into the hole. Once you have the sleeve in the correct position you will be ready to add your monitoring or bait components and fit the steel cap.