Dust Applicators

The Termstop Reticulation Kit features a chemical-resistant pressure pipe with emitter holes at regular spacings to help deliver pesticides around a treated zone or perimeter around buildings.

The Altis 150mm x 50m Pre-Made External Perimeter Roll is for use with the Altis termite reticulation systems. This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet.

Stylish weep hole insert designed for retrofitting into weep holes between 7mm and 17mm in width. Suitable for standard brick heights of 75mm with allowance for mortar. Does not compromise cavity ventilation and protects against the entry of vermin and sparks and embers from bushfires.

The Raxit Ready-to-Use Door Seals eliminate the risk of rodents and pests passing through the threshold and astragal gap of the doors. 

An aluminium profile shielding strip 1m in length, designed for use with the Raxit Door Seals and rodent-proofing systems. Raxit Seals eliminate the risks of rodents and pests passing through the gaps of doors. 

The Altis 90-Degree Joiner is designed to suit Altis reticulation systems in termite management installations. This versatile 90-degree shaped provides a flexible trajectory for the dripper line to circulate around bay windows and other installation requirements. Its superior design includes sealing slip lock joints which offer a secure and easy-to-use fitting.

The Altis Square Pathway Trap is a pump-up fitting that allows the manifold pump to be concealed. This is a lockable trap and is the recommended pathway trap for use with Altis reticulation systems. It comes supplied with 2 screws and requires an Allen key to tighten.

The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.

The Altis 45 degree / 135 degree joint is a dripper line fitting suitable for routing the dripper line around bay windows. No clips are required as the slip lock joints provide the necessary seal required by the termite reticulation system.

The Altis Inline Joint is a dripper line fitting used to join two pieces of dripper line together in the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

The Altis Stop-End is a dripper line fitting used to on the dripper line at the end of a run of the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

The Raxit Ready-to-Use Door Seal is a rodent and pest-proofing seal for doors, gates, and shutters that eliminate the risk of rodent and pest intrusions.