Foaming Equipment

Shop By
Filters
Set Descending Direction

There are 37-48 of 52 products

  1. Term-seal Reo-Band Fibre Glass Mat
    Term-seal Reo-Band Fibre Glass Mat

    TERM-seal Reo-Band FG is non-woven fibreglass mat, specially manufactured with a wax type coating which provides ease of use. The Reo-Band FG is designed for use with TERM-seal Sealant Active and TERM-seal Multi-Purpose Active Coating to reinforce joints and corners.

  2. TERM-seal Sealant Active Crack & Joint Sealant
    TERM-seal Sealant Active Crack & Joint Sealant

    0.1% Bifenthrin

    TERM-seal Sealant Active is designed for use in joints and cracks of all types to protect buildings and other structures from entry by termites. Used by itself for construction joints & saw cuts, it also compliments other TERM-seal products as a bonding agent for concrete, timber, and masonry, sealing penetration collars to pipes, repairs, and joints.

  3. TERM-seal Ura-Fen Shield TWB (Tri-Layer Sheet Barrier)
    TERM-seal Ura-Fen Shield TWB (Tri-Layer Sheet Barrier)

    Bifenthrin

    TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.

  4. Tensorgrip C40 Hi-Tack Spray Adhesive
    Tensorgrip C40 Hi-Tack Spray Adhesive

    Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.

  5. Greenzone Termite Perimeter Barrier System
    Greenzone Termite Perimeter Barrier System

    Greenzone Termite Perimeter Barrier System is a physical termite risk management measure that is flexible in nature and is classed as a chemical barrier in a non-soil matrix. It is a once only treatment that is designed to last the economical life of the building.

  6. Weepa Termite Protector Weep Hole Screen  (PK20)
    Weepa Termite Protector Weep Hole Screen (PK20)

    Bifenthrin infused flexible LDPE

    Patented termite-resistant weep hole guard manufactured from bifenthrin infused plastic. Proven to deter termite entry through existing weep holes for up to 2 years as part of a termite management plan.

  7. Greenzone Backer Rod 50m
    Greenzone Backer Rod 50m

    Greenzone Backer Rods are an integral component of sealant joints and provide three main functions that allow the sealant joint to perform and stop the ingress of pests – in particular ants cockroaches and termites.

  8. Greenzone Termite Paint
    Greenzone Termite Paint

    2g/L bifenthrin

    Greenzone Termite Paint is a unique and innovative solution that provides a long-lasting protective barrier against termites and other pests. The paint is easy to apply, making it an ideal solution for both residential and commercial properties.
  9. Fipforce Dust Termiticide and Insecticide (Pack of 2 x 5g)
    Fipforce Dust Termiticide and Insecticide (Pack of 2 x 5g)

    5g/kg Fipronil

    Fipforce Dust Termiticide and Insecticide contains 5g/kg of Fipronil which is toxic to insects by contact or ingestion. FipForce Dust is applied through a hand duster to help in the control of Termites, Nuisance ants and Cockroaches. It has a mineral based carrier which flows extremely well and is less susceptible to moisture than cellulose based dusts. Less moisture build-up means less clogging of the application procedure.

Set Descending Direction

There are 37-48 of 52 products

Foaming machines for pest control are best suited for small, enclosed spaces where the insecticide foam will create a physical barrier, like down sinks and drains, in hollow tubes and wall voids. The ability of the foam to expand and fill the area means no key surfaces will be missed and any pests nesting within the space will be eliminated by using an insecticidal foam. To produce foam, you can create the necessary pressure within the foaming machine by using the handpump, or in electric foamer systems you can simply activate the compressor by following the unit's instructions. You can also use foaming agents that can be mixed with your liquid pesticide to create a shaving cream-like texture. Our insecticide foaming units are portable making them ideal for spot treatment of pesticide foam in residential and commercial areas.

© Globe Pest Solutions 2024, a division of Australian Agribusiness