-
Term-seal Termite-Pro Perimeter Retreatment System KitThe TERM-seal Termite-Pro Perimeter Retreatment System can be integrated with other TERM-seal systems to provide comprehensive termite protection to both new buildings and renovations or additions to existing buildings across Australia.
-
TermStop Reticulation KitThe Termstop Reticulation Kit features a chemical-resistant pressure pipe with emitter holes at regular spacings to help deliver pesticides around a treated zone or perimeter around buildings.
-
Tramex Moisture Encounter 5 (ME5) MeterThe Tramex Moisture Encounter 5 (ME5) is a dual-depth, non-destructive moisture meter for instant moisture measurement and evaluation.
-
Altis 150mm x 50m Pre-Made External Perimeter Roll
Altis Reticulation Perimeter
The Altis 150mm x 50m Pre-Made External Perimeter Roll is for use with the Altis termite reticulation systems. This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet.
-
Makita 18V Brushless Hammer Driver Drill Kit with 3.0Ah Battery and Charger
The Makita 18V Hammer Driver Drill Kit with 3.0Ah Battery and Charger is a brushless and cordless combo kit that includes 2x 3.0Ah Lithium ion batteries, optimum charger & carry case.
-
GFS Nail Kit 100 Pin + 1 Fuel Cell
GFS Nail Kit 100 Pin + 1 Fuel Cell is a professionally designed spare accessory, ideal for a wide range of actuated nail guns.
-
Concrete Seals / Plugs 6-11mm (Pack of 500)
Concrete seals will plug drill holes in concrete and are made from plastic soft enough to conform to irregular surfaces, but hard enough to hold firmly. Available in a range of colors and sizes to suit your application.
-
Concrete Seals / Plugs 12-14mm (Pack of 500)
Concrete seals will plug drill holes in concrete and are made from plastic soft enough to conform to irregular surfaces, but hard enough to hold firmly. Available in a range of colors and sizes to suit your application.
-
Masonry Drill Bit SDS
High quality masonry drill bits of various diameter and length to suit your application.
-
GFS 1000 Concrete & Steel TRAK Nailing Gun
GFS1000 Concrete & Steel TRAK nailing gun is ideal for installing termite barriers during pre-construction, smooth edge, electrical & data clips, channel & track, steel stud to block and concrete walls, and timber battens to concrete and block walls.
-
Tapered Cork 18 x 11/8mm (Pack of 1000)
A pack of 1000 tapered corks with each cork measuring 18 x 11/8mm. Each cork is made from a single piece of natural cork.
-
GFS Magnetic Adaptor for Nail Gun
Magnetic adaptor designed for use with the GFS Gas Actuated Concrete or Steel Nail Gun
Foaming machines for pest control are best suited for small, enclosed spaces where the insecticide foam will create a physical barrier, like down sinks and drains, in hollow tubes and wall voids. The ability of the foam to expand and fill the area means no key surfaces will be missed and any pests nesting within the space will be eliminated by using an insecticidal foam. To produce foam, you can create the necessary pressure within the foaming machine by using the handpump, or in electric foamer systems you can simply activate the compressor by following the unit's instructions. You can also use foaming agents that can be mixed with your liquid pesticide to create a shaving cream-like texture. Our insecticide foaming units are portable making them ideal for spot treatment of pesticide foam in residential and commercial areas.