- Termifoam 1.2L Foam Injector
A mini pneumatic foamer consisting of a 1.2 litre capacity poly tank with manual hand pump, polyurethane hose and 5mm diameter stainless steel injection nozzle.
- B&G Versafoamer HH 4L Foamer
The Versafoamer HH is an efficient foamer based on a standard B&G 3.8L tank, and is pressurised by hand.
- B&G 220V Versafoamer 4000
This complete foam delivery system is built around a small and quiet compressor, a 3.8L stainless steel tank with a pressure gauge, a 2m hose, a rugged valve with a curved application tip.
Out of stock - PCO Non-Repellent Foaming Agent 1L
PCO Foaming Agent is formulated for use in any foaming machine expands your pesticide into a ”shaving cream” consistency. The thick foam works its way into all of those remote areas so often missed by conventional spray treatments.
- Term-seal Termite-Pro Perimeter Retreatment System Kit
The TERM-seal Termite-Pro Perimeter Retreatment System can be integrated with other TERM-seal systems to provide comprehensive termite protection to both new buildings and renovations or additions to existing buildings across Australia.
- TermStop Reticulation Kit
The Termstop Reticulation Kit features a chemical-resistant pressure pipe with emitter holes at regular spacings to help deliver pesticides around a treated zone or perimeter around buildings.
- Altis 150mm x 50m Pre-Made External Perimeter Roll
Altis Reticulation Perimeter
The Altis 150mm x 50m Pre-Made External Perimeter Roll is for use with the Altis termite reticulation systems. This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet.
- Raxit Ready To Use Door Seals - 75mm x 12.5m
Rubber seal roll only
The Raxit Ready-to-Use Door Seals eliminate the risk of rodents and pests passing through the threshold and astragal gap of the doors.
- Raxit Aluminum Profile Shielding Strip 1m
For use with Raxit seals
An aluminium profile shielding strip 1m in length, designed for use with the Raxit Door Seals and rodent-proofing systems. Raxit Seals eliminate the risks of rodents and pests passing through the gaps of doors.
- Altis 90 Degree Joiner
Altis Reticulation Fitting
The Altis 90-Degree Joiner is designed to suit Altis reticulation systems in termite management installations. This versatile 90-degree shaped provides a flexible trajectory for the dripper line to circulate around bay windows and other installation requirements. Its superior design includes sealing slip lock joints which offer a secure and easy-to-use fitting.
- Altis Square Lockable Pathway Traps
Altis Reticulation Fitting
The Altis Square Pathway Trap is a pump-up fitting that allows the manifold pump to be concealed. This is a lockable trap and is the recommended pathway trap for use with Altis reticulation systems. It comes supplied with 2 screws and requires an Allen key to tighten.
- Altis T-Joint
Altis Reticulation Fitting
The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.
Foaming machines for pest control are best suited for small, enclosed spaces where the insecticide foam will create a physical barrier, like down sinks and drains, in hollow tubes and wall voids. The ability of the foam to expand and fill the area means no key surfaces will be missed and any pests nesting within the space will be eliminated by using an insecticidal foam. To produce foam, you can create the necessary pressure within the foaming machine by using the handpump, or in electric foamer systems you can simply activate the compressor by following the unit's instructions. You can also use foaming agents that can be mixed with your liquid pesticide to create a shaving cream-like texture. Our insecticide foaming units are portable making them ideal for spot treatment of pesticide foam in residential and commercial areas.