-
Kordon Collar (100 Pack)0.5g/kg Deltamethrin
Kordon Collar is a service penetration barrier system. Kordon collars are registered for the protection of buildings and structures against subterranean termites in accordance with AS3660. Available in 2 sizes
-
Homeguard Termiflex Termiticidal Adhesive and Sealant2g/kg Bifenthrin
Homeguard Termiflex Termiticidal Adhesive and Sealant is a unique sealant / builder's adhesive that has been impregnated with Biflex. Use Homeguard Termiflex to hold Homeguard sheets in place until other building elements are installed, by fastening joints and corners corners and holding the sheet to bricks, blocks, concrete and other buliding materials in the gaps between nails and other similar fastening devices.
-
Tensorgrip C40 Hi-Tack Spray AdhesiveTensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.
-
Weepa Termite Protector Weep Hole Screen (PK20)
Bifenthrin infused flexible LDPE
Patented termite-resistant weep hole guard manufactured from bifenthrin infused plastic. Proven to deter termite entry through existing weep holes for up to 2 years as part of a termite management plan.
Globe's insecticide foggers can be divided into two main groups - thermal foggers and ULV cold foggers. Thermal foggers produce an ultra fine mist by heating up the pesticide liquid with a heat coil powered by propane or electricity and vaporising it. These thermal fogging machines produce a large count of incredibly small particles, making for a dense cloud of visible fog. Because the fog droplets that thermal insect foggers create are so small, they stay in the air for longer meaning the pesticides have a better chance of coming into contact with any flying insects in the vicinity. ULV cold foggers or ultra-low volume foggers use air pressure to atomise the insecticides. As they do not use heat, and thus do not pose a fire risk, these pesticide foggers are more suited for indoor use. The particle size of the droplets produced is more uniform and can be controlled by the operator to suit their needs. Cold foggers are ideal for applying fungicides and controlling mould both indoors and outdoors, treating both surfaces and airspaces.