-
Term-seal Termite-Pro Perimeter Retreatment System KitThe TERM-seal Termite-Pro Perimeter Retreatment System can be integrated with other TERM-seal systems to provide comprehensive termite protection to both new buildings and renovations or additions to existing buildings across Australia.
-
TermStop Reticulation KitThe Termstop Reticulation Kit features a chemical-resistant pressure pipe with emitter holes at regular spacings to help deliver pesticides around a treated zone or perimeter around buildings.
-
Tramex Moisture Encounter 5 (ME5) MeterThe Tramex Moisture Encounter 5 (ME5) is a dual-depth, non-destructive moisture meter for instant moisture measurement and evaluation.
-
Altis 150mm x 50m Pre-Made External Perimeter Roll
Altis Reticulation Perimeter
The Altis 150mm x 50m Pre-Made External Perimeter Roll is for use with the Altis termite reticulation systems. This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet.
-
Makita 18V Brushless Hammer Driver Drill Kit with 3.0Ah Battery and Charger
The Makita 18V Hammer Driver Drill Kit with 3.0Ah Battery and Charger is a brushless and cordless combo kit that includes 2x 3.0Ah Lithium ion batteries, optimum charger & carry case.
-
GFS Nail Kit 100 Pin + 1 Fuel Cell
GFS Nail Kit 100 Pin + 1 Fuel Cell is a professionally designed spare accessory, ideal for a wide range of actuated nail guns.
-
Concrete Seals / Plugs 6-11mm (Pack of 500)
Concrete seals will plug drill holes in concrete and are made from plastic soft enough to conform to irregular surfaces, but hard enough to hold firmly. Available in a range of colors and sizes to suit your application.
-
Concrete Seals / Plugs 12-14mm (Pack of 500)
Concrete seals will plug drill holes in concrete and are made from plastic soft enough to conform to irregular surfaces, but hard enough to hold firmly. Available in a range of colors and sizes to suit your application.
-
Masonry Drill Bit SDS
High quality masonry drill bits of various diameter and length to suit your application.
-
GFS 1000 Concrete & Steel TRAK Nailing Gun
GFS1000 Concrete & Steel TRAK nailing gun is ideal for installing termite barriers during pre-construction, smooth edge, electrical & data clips, channel & track, steel stud to block and concrete walls, and timber battens to concrete and block walls.
-
Tapered Cork 18 x 11/8mm (Pack of 1000)
A pack of 1000 tapered corks with each cork measuring 18 x 11/8mm. Each cork is made from a single piece of natural cork.
-
GFS Magnetic Adaptor for Nail Gun
Magnetic adaptor designed for use with the GFS Gas Actuated Concrete or Steel Nail Gun
Globe's insecticide foggers can be divided into two main groups - thermal foggers and ULV cold foggers. Thermal foggers produce an ultra fine mist by heating up the pesticide liquid with a heat coil powered by propane or electricity and vaporising it. These thermal fogging machines produce a large count of incredibly small particles, making for a dense cloud of visible fog. Because the fog droplets that thermal insect foggers create are so small, they stay in the air for longer meaning the pesticides have a better chance of coming into contact with any flying insects in the vicinity. ULV cold foggers or ultra-low volume foggers use air pressure to atomise the insecticides. As they do not use heat, and thus do not pose a fire risk, these pesticide foggers are more suited for indoor use. The particle size of the droplets produced is more uniform and can be controlled by the operator to suit their needs. Cold foggers are ideal for applying fungicides and controlling mould both indoors and outdoors, treating both surfaces and airspaces.