Greenzone Backer Rods are an integral component of sealant joints and provide three main functions that allow the sealant joint to perform and stop the ingress of pests – in particular ants cockroaches and termites.
- TERM-seal Sealant Active Crack & Joint Sealant
0.1% Bifenthrin
TERM-seal Sealant Active is designed for use in joints and cracks of all types to protect buildings and other structures from entry by termites. Used by itself for construction joints & saw cuts, it also compliments other TERM-seal products as a bonding agent for concrete, timber, and masonry, sealing penetration collars to pipes, repairs, and joints.
- TERM-seal Ura-Fen Shield TWB (Tri-Layer Sheet Barrier)
Bifenthrin
TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.
- Vexo MZ30 Solarguard Pro Mesh Kit
Ready to install
VEXO Solarguard Pro Mesh Kits are designed to protect solar panel installations, the roof and electrical wiring from damage caused by rodents, birds and possums by preventing access. Use this solar panel mesh to build an effective physical barrier around your solar panels to keep birds and rodents from nesting underneath.
- Tensorgrip C40 Hi-Tack Spray Adhesive
Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.
- Bird Spider Deterrent
Bird Spiders are stand-alone physical bird deterrents used to scare large birds from concentrated areas.
- GFS Nail Kit 100 Pin + 1 Fuel Cell
GFS Nail Kit 100 Pin + 1 Fuel Cell is a professionally designed spare accessory, ideal for a wide range of actuated nail guns.
- Greenzone Termite Perimeter Barrier System
Greenzone Termite Perimeter Barrier System is a physical termite risk management measure that is flexible in nature and is classed as a chemical barrier in a non-soil matrix. It is a once only treatment that is designed to last the economical life of the building.
- Weepa Termite Protector Weep Hole Screen (PK20)
Bifenthrin infused flexible LDPE
Patented termite-resistant weep hole guard manufactured from bifenthrin infused plastic. Proven to deter termite entry through existing weep holes for up to 2 years as part of a termite management plan.
- D-Ter Animal & Bird Repellent
Safe & Effective
D-Ter Animal & Bird Repellent is a safe and effective repellent used to deter unwanted animals and birds. D-Ter is ideal for use as a repellent for dogs, cats, birds, possums, kangaroos, bandicoots and many other animals.
- Greenzone Termite Paint
2g/L bifenthrin
Greenzone Termite Paint is a unique and innovative solution that provides a long-lasting protective barrier against termites and other pests. The paint is easy to apply, making it an ideal solution for both residential and commercial properties. - Greenzone Termite Paint PrimerGreenzone Termite Paint Primer is recommended for use in conjunction with Greenzone Termite paint to ensure maximum protection.
Globe's insecticide foggers can be divided into two main groups - thermal foggers and ULV cold foggers. Thermal foggers produce an ultra fine mist by heating up the pesticide liquid with a heat coil powered by propane or electricity and vaporising it. These thermal fogging machines produce a large count of incredibly small particles, making for a dense cloud of visible fog. Because the fog droplets that thermal insect foggers create are so small, they stay in the air for longer meaning the pesticides have a better chance of coming into contact with any flying insects in the vicinity. ULV cold foggers or ultra-low volume foggers use air pressure to atomise the insecticides. As they do not use heat, and thus do not pose a fire risk, these pesticide foggers are more suited for indoor use. The particle size of the droplets produced is more uniform and can be controlled by the operator to suit their needs. Cold foggers are ideal for applying fungicides and controlling mould both indoors and outdoors, treating both surfaces and airspaces.