-
Sundstrom Head Harness Single Strap for SR900A replacement elastic head harness single strap for the Sundstrom SR900 Half Face Respirator
Out of stock -
Sundstrom Head Harness Single Strap for SR100 and SR90-3A replacement elasticated single strap head harness for the SR100 and SR90-3 half-face respirators
-
Sundstrom Pre-Filter HolderA single replacement Sundstrom Pre-Filter Holder for use with the SR100 Half Mask and SR200 Full Face Mask
-
Sundstrom SR100 Valve Cover
A single replacement valve cover for the Sundstrom SR100 and SR90-3 Respirators
-
Emergency Spill Kit
The Emergency Spill Response Kit is designed for use with fuel, water-based and chemical spills. Compact and conveniently designed to fit in a satchel, it fits perfectly in your vehicle to ensure you're always prepared for unexpected spills on the job.
-
A-Frame Safety Sign - Warning: Approved Pesticide in Use
Enhance workplace safety with a high-visibility yellow A-Frame Safety sign. This durable and weather-resistant sign contains the message "Warning: Approved Pesticide in Use. No Authorised Entry" to ensure that crucial safety information is easily seen and understood by all.
-
Notice for 'New Construction - Termite Management System' (Pack of 10)
Pack of 10 Notices
A templated sign and notice record for the installation of a Termite Management System during for new construction.
-
Notice for 'Existing Construction - Termite Management System' (Pack of 10)
Pack of 10 Notices
A templated sign and notice record for the installation of a Termite Management System in an existing structure (post-construction).
-
Notice for Termite Treatment (WA Only) - Pack of 10
Only Available in WA. Pack of 10 Notices.
A pack of 10 'Notice of Termite Treatment' templates in accordance with Health (Pesticides) Regulations of 1956.
-
Multi Facet Donger Termite Inspection Tool
Fixed length
The Multi Facet Donger (MFD) is a tool used in termite and building inspections and produces a change in tone when damage or anomalies are present. This donger has been designed to reduce the risk of missing timber damage by providing greater surface contact and covering substantially more surface area than conventional tools.
-
Multi Facet Donger with Telescopic Shaft Termite Inspection Tool
Extendable telescopic shaft
The Telescopic Multi Facet Donger has a lightweight carbon fibre telescopic shaft, a removable head and an integrated timber hardness tester.
-
Led Lenser P7R Core Flashlight
Powerful & rechargeable
The Ledlenser P7R Core Torch is a versatile and sleekly designed flashlight offering exceptional power.
Globe's insecticide foggers can be divided into two main groups - thermal foggers and ULV cold foggers. Thermal foggers produce an ultra fine mist by heating up the pesticide liquid with a heat coil powered by propane or electricity and vaporising it. These thermal fogging machines produce a large count of incredibly small particles, making for a dense cloud of visible fog. Because the fog droplets that thermal insect foggers create are so small, they stay in the air for longer meaning the pesticides have a better chance of coming into contact with any flying insects in the vicinity. ULV cold foggers or ultra-low volume foggers use air pressure to atomise the insecticides. As they do not use heat, and thus do not pose a fire risk, these pesticide foggers are more suited for indoor use. The particle size of the droplets produced is more uniform and can be controlled by the operator to suit their needs. Cold foggers are ideal for applying fungicides and controlling mould both indoors and outdoors, treating both surfaces and airspaces.