Sprayer Spare Parts & Maintenance

TERM-seal Reo-Band FG is non-woven fibreglass mat, specially manufactured with a wax type coating which provides ease of use. The Reo-Band FG is designed for use with TERM-seal Sealant Active and TERM-seal Multi-Purpose Active Coating to reinforce joints and corners.

TERM-seal Sealant Active is designed for use in joints and cracks of all types to protect buildings and other structures from entry by termites. Used by itself for construction joints & saw cuts, it also compliments other TERM-seal products as a bonding agent for concrete, timber, and masonry, sealing penetration collars to pipes, repairs, and joints.

TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.

Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.

Standard sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. Install these bird posts by knocking them into Anchor Rivets. These posts need to be positioned at 1.5m intervals along the ledge. These posts are used for the lead. These posts will be supplied in packs of 100.

Standard sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. These bird posts are designed to be inserted into Stick-on bases. Use these posts when multiple rows of bird wire is needed.

Larger sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. These bird posts are designed to be installed by knocking them into Anchor Rivets. Use these posts when multiple rows of bird wire is needed.

Standard sized bird posts for Bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. The posts are designed to be inserted into Stick-on Bases. These posts are designed for the leading edge of a ledge. The bird post is 4mm diameter and is made with stainless steel.

Stainless steel bird posts are designed for use as part of a bird wire and post system to deter landing from feral pigeons.

The SX Mouse Bait Station is possibly the best value mouse bait box available in the market. These bait stations are manufactured with tough polypropylene and come with a secure lock to reduce access without a key.

SX Fix n Go Pads are a ready-to-use rodent station tether fixing system to secure rat or mouse bait stations to a wall, floor, or surface, whilst allowing the box to be lifted for cleaning.

The SX Clear Trap-In-A-Box Rat Trap Station is a ready to use unit for trapping rats, pre-assembled with a Snap-E rat trap inside.