Bird Proofing Solutions - Commercial

Standard sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. Install these bird posts by knocking them into Anchor Rivets. These posts need to be positioned at 1.5m intervals along the ledge. These posts are used for the lead. These posts will be supplied in packs of 100.

Standard sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. These bird posts are designed to be inserted into Stick-on bases. Use these posts when multiple rows of bird wire is needed.

Larger sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. These bird posts are designed to be installed by knocking them into Anchor Rivets. Use these posts when multiple rows of bird wire is needed.

Standard sized bird posts for Bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. The posts are designed to be inserted into Stick-on Bases. These posts are designed for the leading edge of a ledge. The bird post is 4mm diameter and is made with stainless steel.

Stainless steel bird posts are designed for use as part of a bird wire and post system to deter landing from feral pigeons.

Kordon Collar is a service penetration barrier system. Kordon collars are registered for the protection of buildings and structures against subterranean termites in accordance with AS3660. Available in 2 sizes

Kordon TMB is a complete underslab barrier, providing both termite and moisture protection.

Homeguard Termiflex Termiticidal Adhesive and Sealant is a unique sealant / builder's adhesive that has been impregnated with Biflex. Use Homeguard Termiflex to hold Homeguard sheets in place until other building elements are installed, by fastening joints and corners corners and holding the sheet to bricks, blocks, concrete and other buliding materials in the gaps between nails and other similar fastening devices.

Self-adhesive rolls for service penetration, installed above a finished slab level to indicate service penetration has been protected by Homeguard.

HomeGuard TMB provides total termite protection for the building under slab and contains 1g/kg Bifenthrin.

HomeGuard Protectacote Primer is designed to be applied before HomeGuard Protectacote. Apply a single coat of the primer to run of masonry, concrete or fibre board prior to applying HomeGuard Protectacote Termite and Waterproof Barrier. All surfaces must be clean and free of grease and dirt before application.

HomeGuard Protectacote, in conjunction with the HomeGuard Precision Termite Management System (the HomeGuard System), forms a continuous waterproof and termite resistant barrier around the perimeter of new slab-on-ground structures and extensions to existing structures.