Search results for: 'termite baiting station key'
- Altis Stop End with Locking Rings
Altis Reticulation Fitting
The Altis Stop-End is a dripper line fitting used to on the dripper line at the end of a run of the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.
- Racumin Mouse and Rat Wax Blocks
0.37g/kg Coumatetralyl
Racumin Mouse and Rat Blocks are ready to use. It is an economical anticoagulant product which requires repeated feeding over several days by the rodents to achieve control. In this way rodents do not become shy of the bait as may happen with acute baits. Pets and farm animals are at minimal risk as they are unlikely to gain repeated access to the bait.
- TERM-Seal Annular Soft Collar
TERM-seal soft annular collars are used to protect slab penetrations and prevent the entry of Termites. These collars are supplied pre-cut to fit 40mm (water), 40mm (elect), 50mm, 65mm, 80mm, and 100mm pipe and conduit sizes.
- Kordon Collar (100 Pack)
0.5g/kg Deltamethrin
Kordon Collar is a service penetration barrier system. Kordon collars are registered for the protection of buildings and structures against subterranean termites in accordance with AS3660. Available in 2 sizes
- PCO Fipronil 100SC Termiticide and Insecticide
100g/L Fipronil
PCO Fiponil 100SC is a cost effective non-repellent termiticide and insecticide for the control of Termites and nuisance ants. Formulated in Australia to a high standard.
- Altis Multi Manifold Single/Double 150mm Take Off
For Altis Reticulation Systems
The Multi Manifold Single/Double 150mm Take Off is expertly designed to connect your Altis Termite Reticulation System to a pump-up point, making it ideal for external perimeter installations covering up to 100 linear meters.
- Altis Herbie Clips 25mm
Altis Reticulation Fitting
The Herbie Clip 25mm is the ultimate injection-moulded fiberglass polypropylene hose clamp for reliability and efficiency with the Altis termite reticulation system.
When you need a superior alternative to metal clamps, the Herbie Clip 25mm stands out as the go-to solution. Engineered with a patented double jaw design, this innovative hose clamp delivers exceptional strength, guaranteeing up to 200 psi pressure resistance. Unlike traditional metal clamps, the Herbie Clip is heat and UV stabilised, ensuring it remains impervious to harsh environmental conditions and contaminants, making it ideal for long-term use in challenging environments.
- Altis T-Joint
Altis Reticulation Fitting
The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.
- Biflex Ultra Lo-Odour 100EC Termiticide & Insecticide
100g/L Bifenthrin, 533g/L Liquid Hydrocarbons
Biflex Ultra-Lo-Odour Termiticide and Insecticide is a cost-effective, broad spectrum, long residual, liquid insecticide and termiticide for use as an internal and external treatment of a wide range of pests.
- Altis 150mm x 50m Pre-Made External Perimeter Roll
Altis Reticulation Perimeter
The Altis 150mm x 50m Pre-Made External Perimeter Roll is for use with the Altis termite reticulation systems. This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet.
- GFS 1000 Concrete & Steel TRAK Nailing Gun
GFS1000 Concrete & Steel TRAK nailing gun is ideal for installing termite barriers during pre-construction, smooth edge, electrical & data clips, channel & track, steel stud to block and concrete walls, and timber battens to concrete and block walls.
- Trapper Hidden Kill Mouse Trap
The Hidden Kill Mouse Trap is an economical choice for PMPs looking for a discreet option for trapping mice. The trap is designed with a quick, no mess capture and kill mechanism that is an upgrade from the unsightly kill of outdated wood traps, all at an exceptional value.