Search results for: 'beetl pack stainless starl 10mm x 4mm'

Maximise your termite protection with the cutting-edge Termidor High Pressure Device (HPD). The Termidor High Pressure Device is specifically designed to be used for applications of Termidor HE by allowing for hole spacings of up to 600mm, ensuring the same unparalleled coverage with fewer drill points.

Developed in collaboration with BASF, the Termidor High Pressure Device operates at a minimum pressure of 800psi, harnessing the power of Termidor HE's patented Advanced Polymer Technology™. This synergy between Termidor HE and the high-pressure device offers pest control professionals a revolutionary way to apply termite treatments, reducing the number of holes needed and minimising disruption to structures.

Killgerm AF Flour Moth Glue Pads contain a pheromone-based attractants to lure flour moths (Ephestia spp. and Plodia sp.)

Silvalure Moth Wall Glue Board is designed to attract and trap Stored Product Moths such as Ephestia spp. and Plodia interpunctella.

This one-sided glue board wraps around the inside of the Silvalure Funnel Trap Set.

PROTECTA EVO Edge is a versatile rodent bait station that is easy to use and service. The station opens and locks quickly with Bell’s EVO key. The built-in service record card holder, side-opening design and rounded interior walls make servicing fast, maximizing technician productivity. The station has a large bait capacity holding up to eight 28 g or four 225 g Blox securely inside the station and comes with vertical securing rods.

Avishock Screw-In Wire Guides are used for securing lead wire. Easily installed using a self-tap screw, these guides are ideal for installations on stone.

Stylish weep hole insert designed for retrofitting into weep holes between 7mm and 17mm in width. Suitable for standard brick heights of 75mm with allowance for mortar. Does not compromise cavity ventilation and protects against the entry of vermin and sparks and embers from bushfires.

UniSafe VC105 Browguard and Face Shield is a lightweight and high-impact face shied with blue browguard

HomeGuard DPC provides total termite protection for the building perimeters. HomeGuard DPC (Damp Proof Course) is a tough, 500 micron, embossed polymer sheeting impregnated with Bifenthrin and when used as a component of a termite management system, meet the requirements of AS 3660.1 approved in accordance with and AS 3660.3 – Termite Management.

Starkeys Glue Boards are designed for the monitoring of flying insects within UV fly trap units. The glue is totally UV protective and will not melt, run or drip under normal UV rays or heat.

Anchor Rivets are used with Split Pins to create an intermediate fixing for securing cable around the perimeter. They are also designed to hold Bird posts into drilled holes.

The Multi Manifold Single/Double 150mm Take Off is expertly designed to connect your Altis Termite Reticulation System to a pump-up point, making it ideal for external perimeter installations covering up to 100 linear meters.

Shieldrite Crawling Insect Foam is a non repellent suspension concentrate formulated into a ready to use foam for the use in the management of pest insects including Termites, European wasps, Ants, Cockroaches and Bed bugs.