Search results for: 'seal plastic spray band'

The TeeJet TP4004E - 40° Brass Even Flat Spray Nozzle produces consistent distribution throughout the flat spray pattern. It mounts easily on a spray boom or planter and works great when used to band over a crop row or in the middle of a row.

The TeeJet TP4002E - 40° Brass Even Flat Spray Nozzle produces consistent distribution throughout the flat spray pattern. It mounts easily on a spray boom or planter and works great when used to band over a crop row or in the middle of a row.

The TeeJet TP4001E - 40° Brass Even Flat Spray Nozzle produces consistent distribution throughout the flat spray pattern. It mounts easily on a spray boom or planter and works great when used to band over a crop row or in the middle of a row.

TERM-seal soft annular collars are used to protect slab penetrations and prevent the entry of Termites. These collars are supplied pre-cut to fit 40mm (water), 40mm (elect), 50mm, 65mm, 80mm, and 100mm pipe and conduit sizes.

The TeeJet TP8004 - 80° Brass Flat Spray Nozzle produces consistent distribution throughout the flat spray pattern. It mounts easily on a spray boom or planter and works great when used to band over a crop row or in the middle of a row.

TERM-seal Sealant Active is designed for use in joints and cracks of all types to protect buildings and other structures from entry by termites. Used by itself for construction joints & saw cuts, it also compliments other TERM-seal products as a bonding agent for concrete, timber, and masonry, sealing penetration collars to pipes, repairs, and joints.

The Stick-on plastic bases support bird wire system and can be glued to any ledge surface. Posts that are 4mm are designed to be inserted into these Stick-on Bases.

Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.

TERM-seal PRM Active (poly reinforced membrane) is a specialised termite and moisture proof sheeting that doubles as a damp course over masonry to provide a continuous physical termite barrier for all types of construction.

A pressure-washer style spray gun with a Viton™ Seal, threaded 11/16" hose connection and female quick-connect wand / nozzle output connection.

TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.

The Gunjet 30 Spray Gun has a maximum operating pressure of 1500 PSI and is ideal for all types of spraying. It is durable and designed for excellent corrosion resistance.