Search results for: 'seal solo injector blue bell to'

TERM-seal Reo-Band FG is non-woven fibreglass mat, specially manufactured with a wax type coating which provides ease of use. The Reo-Band FG is designed for use with TERM-seal Sealant Active and TERM-seal Multi-Purpose Active Coating to reinforce joints and corners.

TERM-seal Sealant Active is designed for use in joints and cracks of all types to protect buildings and other structures from entry by termites. Used by itself for construction joints & saw cuts, it also compliments other TERM-seal products as a bonding agent for concrete, timber, and masonry, sealing penetration collars to pipes, repairs, and joints.

TERM-seal PRM Active (poly reinforced membrane) is a specialised termite and moisture proof sheeting that doubles as a damp course over masonry to provide a continuous physical termite barrier for all types of construction.

TERM-seal Ura-Fen Termite Resistant Adhesive is a high-quality, solvent-based polymer adhesive, specifically formulated for bonding TERM-seal Ura-Fen Shield TWB to concrete, masonry and sealing joins and corners of the termite barrier.

TERM-seal Multi-Purpose Active is a highly engineered, acrylic polymer-based liquid which upon curing forms a seamless, flexible, termite resistant and waterproof membrane. TERM-seal Multi-Purpose Active is applied by brush, roller or heavy-duty airless spray gun, applications include wall backfills, internal walls, internal wet areas, construction joints, step downs & cavities.

TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.

Bell’s T-Rex rat snap trap now comes with an incredible new feature, built-in sensing technology. Technicians can place T-REX iQ traps in hard to reach locations and know when there is a capture.

The Altis Inline Joint is a dripper line fitting used to join two pieces of dripper line together in the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

The Altis Stop-End is a dripper line fitting used to on the dripper line at the end of a run of the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.

Concrete seals will plug drill holes in concrete and are made from plastic soft enough to conform to irregular surfaces, but hard enough to hold firmly. Available in a range of colors and sizes to suit your application.

Concrete seals will plug drill holes in concrete and are made from plastic soft enough to conform to irregular surfaces, but hard enough to hold firmly. Available in a range of colors and sizes to suit your application.